PRS-801B電阻系統

高達200兆歐的數字表面電阻計

▲精確的寬范圍電阻測量值：0.01? 至2.00x1014?

▲從1.00到±2%的準確度? 至9.99x1010?

▲用于低電阻測量的可變電壓為0.1 mv至9.99 V

▲恒定測試電壓10V和100V，符合ANSI/ESD S20標準。20

▲自動電阻范圍控制

▲自動測試電壓控制

▲使用可充電鋰離子電池組

▲一次充電大約進行8000次測量（一般480小時）

▲999數據集存儲器

▲使用Prostat Connect 2.0分批或單獨下載到Excel?中

▲使用Micro USB電纜充電和下載數據

▲兩小時內充電

▲主儀表2年有限保修

產品概述：

對你的測量有信心

PRS-801B電阻系統提供了分辨率和精度，可根據所有ESD電阻測量協會文件，如ESD TR53、ANSI/ESD S4，有效測量地板、工作表面、手推車、服裝、包裝、平面材料的點對點電阻（Rtt）和接地電阻（Rtg）。1，ANSI/ESD S7。1，ANSI/ESD STM97。1，ANSI/STM S11。11，ANSI/STM S11。12和ANSI/STM S11。13

產品鑒定的理想工具

PRS-801B數字電阻表具有測量速度、寬量程和準確度的卓越性能組合。其恒定測試電壓系統非常穩定，與實驗室水平的臺式儀器一致。

最寬量程儀表

PRS-801B的寬量程為測量應用提供了最大的靈活性。PRS-801B是唯一一款量程為0.01的電池供電儀表? 至2.00x1014?. 事實上，PRS-801B在1中充當3個工具：

測量范圍為0.01至1.0x104的低電阻測距儀?. 大多數便攜式儀器在1.0x103歐姆或以下無法準確測量。因此，典型的ESD審核員必須攜帶數字萬用表，用于對接地連接進行低電阻檢查。

符合ANSI/ESD S20標準的寬電阻范圍審計儀表。20和TR53從1.00x103到1.00x1011的程序?. 測量指南要求在設施ESD計劃的電阻要求以下十年到以上十年之間進行精確測量。根據項目要求，PRS-801B很容易超過這一要求30年。

精密高阻測量儀器，用于包裝符合S541標準，材料和產品的測試和驗收驗證。

很少有競爭性儀器可以精確測量1.00x1011歐姆或以上，而PRS-801B可以輕松測量2.00x1014歐姆。

沒有在PRS-801的大范圍內運行的審計儀器或?qū)嶒炇遗_式儀器

旨在提高生產率和工作效率

易于閱讀的6位7段彩色大屏幕

在顯示屏上輕松切換指數和歐姆測量值

可存儲和調用多達999個數據集的內部存儲器

可編程彩色LED指示電阻范圍

方便的檢修門，在不破壞校準密封的情況下快速更換電池

顯示屏上的電池狀態指示燈

使用時充電，無需取出電池

測量靈活性

連接到幾乎任何雙線夾具或電極配置。PRS-801B的簡單?英寸端子間距提供了與各種電極和夾具的連接。

端子設計允許使用機械屏蔽或非屏蔽香蕉插頭引線

間距為?英寸的BNC適配器直接安裝在PRS-801B端子上，用于使用寬量程探頭和夾具進行測量

儀器參考允許使用第三線儀器參考，以最小化外部磁場對精密夾具測量的影響

電氣化時期

PRS-801B是當今精密測量市場上速度最快的測量儀器之一。實驗室測試證實，PRS-801B可以在2.5秒內測量0到1.0x1012歐姆。因此，根據ANSI/ESD STM 11.11《平面材料的表面電阻》，其規定的通電時間（EP）為15秒。此外，其EP自動調整，以確保顯示穩定的測量值。

多種操作模式

PRS-801B具有自動、手動、自動-手動和連續操作模式，以及指數顯示或標準數字顯示?, K?, M?, G? 和T?. 它易于使用和閱讀。幾十年來，使用從<103到>1014的多個LED進行測量總結，其顏色可由用戶編程為紅色、綠色或黃色。

恒定測試電壓

PRS-801B有三個測試電壓范圍，為可重復測量提供穩定的測試參考。在自動模式下，儀器會自動為被測電阻選擇合適的測試電壓。

<10伏：0.01至9.99x103?

在0.1 mV到9.99V的范圍內，<10V是可變的

10伏–負載下的恒定電壓

恒定在1.00x104到9.99x105之間?

100伏–負載下的恒定電壓

恒定在1.00x106到2.00x1014之間?

在一次充電中進行數千次測量

新型高性能電池利用鋰離子技術，一次充電可使你保持近500小時的強勁動力。通常情況下，PRS-801B在充電前會進行大約8000次測量。有了易于接近的電池門，你可以快速更換電池。

801B-012電池組已經過測試，并被發現符合“聯合國示范法規、測試和標準手冊、ST/SG/AC.10/11/Rev.7第三部分第38.3小節”的標準，也稱為“UN38.3”。因此，它們可以通過任何方式在國際上不受限制地運輸。

高質量的測試線索

Prostat的10英尺測試引線與PRS-801B一起提供，由數百根細銅線組成，具有靈活性和準確性。每根測試引線的外絕緣均為高等級硅，具有極高的電阻，以最大限度地減少測量誤差。這些引線設計用于在高達1.00x1012的制造環境中進行方便的審計測量?.

800PSL和800TVL高性能測試引線線束設計用于1012至1014范圍內的高電阻測量。它包括一根屏蔽負極測試引線，以確保準確性，并將來自人員和設備的電氣干擾降至最低。屏蔽直接連接到PRS-801B儀器參考和夾具接地。

使用Prostat Connect 2.0下載數據

PRS-801B不僅可以快速進行精確測量，還可以立即記錄測量數據，或批量下載到Excel?電子表格程序中。這最大限度地減少了換位錯誤，加快了精確測量的速度。隨附的Prostat Connect 2.0軟件易于加載和使用。PRS-801B使用提供的USB電纜連接到計算機的USB端口。

▲在自動連接模式下，您可以控制PRS-801B測量順序，以便在每次測量結束時將每個數據點下載到電子表格中。電子表格光標自動移動到下一個數據輸入單元，為后續測量做準備。

▲一旦多達999個數據點存儲在PRS-801B的內存中，它們就可以在以后下載到電子表格中。每個數據點將被放置在自己的電子表格單元中。

▲使用Connect 2.0時，會為每個測量集維護一個備份文本文件，其日期、時間和位置（如果需要）。

▲Connect 2.0實用程序與從XP到Windows 10的32位和64位版本的Windows兼容。

PRS-801B Resistance System

DIGITAL SURFACE RESISTANCE METER UP TO 200 TERAOHMS

▲Accurate Wide Range Resistance Measurements: 0.01 ? to 2.00x1014 ?

▲Accuracy of ±2% from 1.00 ? to 9.99x1010?

▲Variable Voltage 0.1 mv to 9.99 V for low resistance measurements

▲Constant Test voltages 10V and 100V meeting ANSI/ESD S20.20

▲Auto Resistance Range Control

▲Auto Test Voltage Control

▲Uses a Rechargeable Li-ion Battery Pack

▲Takes Approximately 8,000 Measurements on a Single Charge (480 hours typical)

▲999 Data Set Memory

▲Download to Excel? in Batches or Individual Measurements with Prostat Connect 2.0

▲Uses Micro USB Cable for Charging and Downloading Data

▲Charges in 2 Hours

▲2-year Limited Warranty on Main Instrument

Product Overview：

Have confidence in your measurements

The PRS-801B Resistance System provides the resolution and accuracy to efficiently measure resistance point-to-point (Rtt) and resistance-to-ground (Rtg) of floors, worksurfaces, carts, garments, packaging, planar material in accordance with all of the ESD Association documents for resistance measurements, such as ESD TR53, ANSI/ESD S4.1, ANSI/ESD S7.1, ANSI/ESD STM97.1, ANSI/STM S11.11, ANSI/STM S11.12 and ANSI/STM S11.13.

The ideal tool for product qualification

The PRS-801B digital resistance meter has an outstanding performance combination of measurement speed, wide range and accuracy. Its constant test voltage system is extremely stable and consistent with lab level, bench top instruments.

The widest range meter

The PRS-801B’s wide range offers the maximum flexibility in measurement applications. The PRS-801B is the only battery operated meter with a range of 0.01 ? to 2.00x1014 ?. In fact, the PRS-801B serves as 3 instruments in 1:

A low resistance range meter for measurements from 0.01 to 1.0x104 ?. Most portable instruments do not measure accurately at or below 1.0x103 ohms. Therefore, a typical ESD Auditor must carry a digital multimeter for low resistance checks of ground connections.

A wide resistance range audit meter to meet ANSI/ESD S20.20 and TR53 procedures from 1.00x103 to 1.00x1011 ?. Measurement guidelines require accurate measurements from one decade below to one decade above the resistance requirements of a facility’s ESD program. The PRS-801B easily exceeds this requirement by as much as 3 decades, depending on program requirements.

Precision high resistance measurement instrument for Packaging to S541 Standards, material and product testing and acceptance verification.

Few competitive instruments can measure accurately up to or beyond 1.00x1011 ohms, while the PRS-801B comfortably measures up to 2.00x1014 ohms.

There are no audit instruments or laboratory bench top instruments that perform in the PRS-801’s wide range

Designed to be more productive and work more efficiently

Large easy to read 6 digit, 7 segment color display

Easily toggle between exponential and ohmic measurements on the display

Internal memory capable of storing and recalling up to 999 data sets

Programmable color LED’s indicating resistance ranges

Easy-access door for fast battery changes without breaking the calibration seal

Battery status indicator on the display

Charges while being used, without removing the battery

Measurement flexibility

Connect to virtually any 2-wire fixture or electrode configuration. The PRS-801B’s simple ? inch terminal spacing provides connectivity to a variety of electrodes and fixtures.

Terminal design allows use of mechanically shielded or non-shielded banana plug leads

BNC adapters with ? inch spacing mount directly to the PRS-801B terminals for measurements with wide range probes and fixtures

An instrument reference allows use of a third wire instrument reference to minimize effects of extraneous fields on precision fixture measurements

Electrification period

The PRS-801B is one of the fastest measurement instruments in today’s precision measurement market. Laboratory tests confirm the PRS-801B can measure from 0 to 1.0x1012 ohms in 2.5 seconds. Thus, its specified electrification period (EP) is 15 seconds in accordance with ANSI/ESD STM 11.11 Surface Resistance of Planar Materials. Furthermore, its EP is automatically adjusted to insure a stable measurement is displayed.

Multiple modes of operation

The PRS-801B has Automatic, Manual, Auto-Manual and Continuous operational modes, plus exponential display or standard numeric display in ?, K?, M?, G? and T?. It’s easy to use and read. Measurements are summarized in decades using multiple LED’s from <103 to >1014, whose colors are user programmable to be RED, GREEN or YELLOW.

Constant test voltages

PRS-801B has three Test Voltages ranges that provide stable test references for repeatable measurements. In AUTO mode, the instrument automatically selects the proper test voltage for the resistance being measured.

<10 Volts: 0.01 to 9.99x103 ?

<10V is variable across this range from 0.1 mV to 9.99V

10 Volts – Constant Voltage under Load

Constant at 1.00x104 to 9.99x105 ?

100 Volts – Constant Voltage under Load

Constant at 1.00x106 to 2.00x1014 ?

Take thousands of measurements on a single charge

New high-performance batteries take advantage of Li-ion technology to keep you going strong for almost 500 hours on a single charge. Typically, the PRS-801B will take approximately 8,000 measurements before you need to charge it. And with the easy-access battery door you can make battery swaps fast.

The 801B-012 battery packs have been tested and were found to comply with the criteria of “UN Model Regulations, Manual of Test and Criteria, ST/SG/AC.10/11/Rev.7 Part III, subsection 38.3”, also known as “UN38.3”. As a result they can be shipped unrestricted internationally by any means.

High quality test leads

Prostat’s 10 foot test leads supplied with the PRS-801B consist of hundreds of fine strands of copper that offer flexibility and accuracy. The outer insulation of each test lead is high grade silicon with an extremely high resistance to minimize measurement errors. These leads are designed for convenient audit measurements in the manufacturing environment up to 1.00x1012 ?.

The 800PSL and 800TVL high performance test leads harness are designed for high resistance measurements in the 1012 to 1014 range. It includes a shielded negative test lead for accuracy and minimum electrical interference from personnel and equipment. The shield is connected directly to the PRS-801B instrument reference and fixture ground.

Download data with Prostat Connect 2.0

Not only does the PRS-801B make accurate measurements quickly, it documents measurement data immediately or in batch downloads to your Excel? Spreadsheet program. This minimizes transposition mistakes and speeds up precision measurements. The included Prostat Connect 2.0 software is easy to load and use. The PRS-801B connects to your computer’s USB port using the provided USB cable.

▲In the Auto Connect mode, you can control the PRS-801B measurement sequence so that each data point is downloaded to the spreadsheet at the conclusion of each measurement. The Spreadsheet cursor automatically moves to the next data entry cell in preparation for the subsequent measurement.

▲Once as many as 999 data points are stored in the PRS-801B’s memory, they can be downloaded to a spreadsheet at a later time. Each data point will be placed in its own spreadsheet cell.

▲When Connect 2.0 is used, a backup Text file is maintained for every measurement set, its date, time and location should you desire.

▲The Connect 2.0 utility is compatible with 32-bit and 64-bit version of Windows from XP all the way to Windows 10.