中高頻感應加熱設備 中小型 手持式 40kw電磁加熱器 曰佳

一、智能化強

1、可以監控每個工件的加熱的溫度曲線，電流電壓曲線、計數等，存儲記憶并打印出來。

2、可以存儲設置多個工件的加熱工藝參數，換取不同工件的時候，無需再行調試直接調取使用。

3、可以設置多段時間功率加熱、日佳數字機器具有5段時間功率控制功能。模擬機器一般只有兩段時間和兩個功率電位器調節。

4、預留溫度、速度及其他控制傳感器接口，來滿足客戶所需要加熱工藝要求。也可以根據客戶要求定制多段加熱恒溫恒功率等功能特殊機型。

5、具有上網功能。通過wifi可以與手機或者電腦連接，具有遠程操作控制及數據采集功能。也便于廠家遠程指導維修功能。

I. More intelligent

1. It can monitor the heating temperature curve of each workpiece, current voltage curve, count, etc., store memory and print it out.

2. Can store the heating process parameters of multiple workpieces. After exchange for different workpieces, Just adopt the parameter from the storage .

3. Ri Jia digital machine are equipped with multi-stage power heating and have five time power control functions. Typically products in the market only have two periods of time and two power potentiometers.

4. RI Jia products are equipped with temperature, speed and other control sensor interfaces to meet all the heating process requirements. We can also customize multi-stage heating and constant power and other special models according to customers' requirements.

5. Have the Internet function. Ri Jia products can be connected with mobile phone or computer in the WiFi  environment , which can support remote operation control and data acquisition function. It is very convenient for manufacturers to supply maintenance service  .

二、應用廣

1、工作頻率范圍寬：日佳加熱設備頻率500HZ—200KHZ、在以上頻段日佳加熱設備都可以做到最佳功率輸出。模擬機工作頻率范圍窄一般都在10KHZ左右，超過這個頻率范圍功率都會變小或者不工作。

2、加熱負載范圍寬、輕重負載都可以達到最佳匹配輸出、一臺機器可以加熱導磁性強的金屬鋼鐵等負載重的工件，也可以導磁性弱金屬鋁銅等負載輕的工件大功率加熱。而模擬機器則需要配置不同的兩臺機器才能完成。

2. Widely application

1. Wide range of working frequency: the frequency of Ri Jia products heating equipment is 500HZ--200KHZ, and the optimal power output can be achieved at that frequency range. The operating frequency range of the simulator is generally around 10KHZ,so beyond the frequency range ,it will be smaller or does not work.

2, wide range of heating load, heavy load . We can ensure the best match output, a machine can heat conductivity magnetic metals such as steel strong negative load artifacts, can also be weak magnetic conductivity of aluminum copper light artifacts and high-power heating load. The simulation machine requires two different machines to complete.

三、質量好

1、電壓方面：電壓可以實時監控顯示控制等功能，無論功率多大頻率多高，槽路電壓都是控制在900V電壓之內。電壓低于常見機器的三到十倍，排除了因電壓高打火造成輸出變壓器與功率模塊IGBT易損壞的情況?？箰毫迎h(huán)境也得以提高。

2、電流方面：電流可以實時監控顯示控制等功能， IGBT電流工作在額定電流的80%之內，電流控制采樣按照每一次脈沖檢測一次槽路電流，這樣即不會超過它的額定電流，又保證了模塊不易損壞。在逆變輸出存在異常情況下強制停止工作。保證了設備的可靠性。

3、日佳加熱設備采用模塊化設計，減少了硬件電路，布局簡單合理，減少了故障源。異常現象主要用軟件控制保護，比硬件提高了保護響應時間，很好的提高了機器的安全性能。

Excellent quality

1. Voltage: the voltage can be monitored and displayed in the screen . No matter how high the power is and the channel voltage is controlled under 900V voltage. The voltage is one third to ten percent of that of the common machine, which eliminates the damage to the output transformer and the power module IGBT due to high voltage. The resistance to harsh conditions has also improved.

2, Electric current: monitored and displayed in the screen, IGBT current work within 80% of the rated current, current control sampling according to each time a tank circuit current pulse detection, which does not exceed its rated current, and ensure that the module is not easy to damage .When the inverter output is abnormal ,it will not work . The reliability of the equipment is guaranteed.

3. The Ri Jia products heating equipment adopts the modular design, which reduces the hardware circuit, the layout is simple and reasonable, and the fault source is reduced. The abnormal phenomenon is mainly protected by software, which improves the response time and improves the safety performance of the machine.

四、節能多

1、日佳感應加熱具有變頻功能，可以根據工件智能變頻，達到節能的效果。

2、日佳設備全數字化控制，用軟件代替了很多硬件控制部分，減少了元件發熱，降低了功耗。

3、可以定制智能化加熱設備，比如感應器內有工件的時候按照設置好的的功率加熱，沒有工件自動轉換維持機器工作的最小電流狀態。這樣不僅降低了功耗，也減少了操作工的工作強度及頻繁啟動設備。

4、日佳全數字變頻感應加熱一般比老式模擬機器節能5%~50%。

4. Saving more Energy

1. Ri Jia products induction heating has the function of frequency conversion, which can achieve energy saving effect according to the intelligent frequency conversion of the workpiece.

2. Digital control system , replace many hardware control parts by software, reduce the heating of components and lower power consumption.

3. We can customize the intelligent heating equipment, when the workpiece is in , it is heated according to the set power, and there is no workpiece ,it will maintain the minimum current state . This function will not only reduce the power consumption, but also reduce the operator's work intensity and the frequency of the start and off of the equipment.

4. Ri Jia products digital frequency conversion induction heating is generally 5%~50% less energy efficient than the old analog machine.

五、壽命長

1、日佳電路設計的逆變電壓很低，這樣不光是抗惡劣環境也延長了使用壽命。

2、去掉電解濾波電容改用無極薄膜電容，因為電解電容一般壽命在10年左右，而薄膜電容壽命比它要高幾倍，大大提高了機器的壽命。

3、可以定制全封閉機器，用十年后內部依然如新。

Durable in use

1. Ri Jia products inverter voltage is very low, so it is not only the anti-harsh environment but also extends the service life.

2. Remove the electrolytic filter capacitor and switch to a non-polar film capacitor, because the electrolytic capacitor generally lives about 10 years, and the life of the film capacitor is several times higher than that, which greatly improves the life of the machine.

3. We can customize the fully enclosed machine, and it will remain new after 10 years.