發票說明：當前價格不含稅，開票另加稅點，詳細咨詢客服！

注：關于本產品標題，由于商品標題搜索功能的特性，為方便采購方的購物搜索，所起標題關鍵詞僅適用于搜索功能，不涉及廣告宣傳和功能描述。

溫馨提示：由于現貨市場浮動較大，店鋪所有規格均為參考價格，具體報價請咨詢客服，謝謝！

花的產生，主要是含有鉛元素。高純度的鋅是不能生成鋅花的，因為其中缺少結晶核。在以往鍍鋅所采用的鋅錠中，都或多或少含有一定量的鉛，

這主要是由于在鋅礦的冶煉、蒸餾和冷凝過程中，鋅鉛總是共同存在。因此人們總能看到鍍鋅產品表面的鋅花圖案。近年來通過采用電解回收方法

生產出來的鋅的純度可達99.99%以上，使鋅內不再存在鉛，從此鍍鋅廠家就可通過采用無鉛(約≤0.01%)或低鉛(約0.01%—0.05%)工藝來生產無鋅花

產品。無鉛或低鉛工藝就是通過降低鋅液中的鉛含量，使鋅層在凝固過程中增加形核點的數量，致使形核速度增加，同時降低晶粒長大速度，從而

阻止鋅花晶粒的長大。無鋅花產品表面不存在大量的晶界減薄和鋅花的起伏，再經過光整后可獲得非常平滑的表面。這種產品經涂漆后可得到高質量

的涂漆產品。同時無鉛鋅花的另一個好處是不會產生晶間腐蝕。晶間腐蝕是由于鉛集中在晶界處，在潮濕環境的影響下造成鋅層的機械性能下降。

Flower production, mainly contains lead elements.High-purity zinc cannot generate zinc flowers because of the lack of a crystalline nucleus found in it.In the zinc

ingots used in previous zinc plating, they all contain more or less a certain amount of lead, mainly due to the common existence of zinc and lead in the smelting, distillation and condensation of zinc mines.Therefore, people can always see the zinc flower patterns on the surface of galvanized products.In recent years,

the purity of the zinc produced by using the electrolysis recovery method can reach more than 99.99%, so that there is no longer lead in the zinc,

and from then on, the galvanizing manufacturers can produce the zinc-free flower products by using the lead-free (about 0.01%) or low lead

(about 0.01% to 0.05%) process.Lead-free or low-lead process is to reduce the lead content in the zinc liquid, make the zinc layer increase the number of nuclei

during solidification, resulting in the increase of the core speed, and reduce the growth speed of the grain, thus preventing the growth of zinc flower grains.

There is no lot of grain thinning and zinc flowers, and then after light finishing can get a very smooth surface.This product is painted with high quality painted products.Another advantage of simultaneous lead-free zinc flowers is that they do not produce intercrystalline corrosion.Intercrystalline corrosion is due to the concentration of lead at the crystal boundary, reducing the mechanical properties of the zinc layer under the influence of a wet environment.