福斯特種脫模劑LUBRODAL-F-318-N水溶性成型潤滑劑
價格
訂貨量(桶)
¥1800.00
≥1
店鋪主推品 熱銷潛力款
萦萭萪萬萨萧萤萩萦营萨
在線客服
深圳市宏陽潤滑油有限公司
店齡3年 企業認證
聯系人
陽雨
聯系電話
萦萭萪萬萨萧萤萩萦营萨
經營模式
經營批發
所在地區
廣東省深圳市
LUBRODAL F 318 N
Transparent forming lubricant
Transparent forming lubricant
Performance Features
- water miscible
- increases die life
- high wetting and cooling properties
- improves the ability to transform forging parts
- avoids failures
- lowers the percentage of rejects
- clean, effective operation
- water miscible
- increases die life
- high wetting and cooling properties
- improves the ability to transform forging parts
- avoids failures
- lowers the percentage of rejects
- clean, effective operation
Description
LUBRODAL F 318 N is a water miscible die lubricant, free of graphite. It shows outstanding releasing-, lubricating- and propulsive effects and forms a white, adhesive releasing film of high lubricity on the engraved surfaces.
LUBRODAL F 318 N is a water miscible die lubricant, free of graphite. It shows outstanding releasing-, lubricating- and propulsive effects and forms a white, adhesive releasing film of high lubricity on the engraved surfaces.
Field of application
LUBRODAL F 318 N is used in hot and warm forging of steel, in particular if graphite containing die lubricants cannot be used due to hygienic reasons. LUBRODAL F 318 N is especially designed for application by flooding and flushing, too.
LUBRODAL F 318 N is used in hot and warm forging of steel, in particular if graphite containing die lubricants cannot be used due to hygienic reasons. LUBRODAL F 318 N is especially designed for application by flooding and flushing, too.
Method of application
LUBRODAL F 318 N is a concentrate and must be diluted with water before application. It can be applied via suitable spraying systems but it is also suitable for an application in terms of splash water. A strong spray jet with adjustable throughputs of the nozzles as well as an adjustable air-fluid ratio are required.
LUBRODAL F 318 N is a concentrate and must be diluted with water before application. It can be applied via suitable spraying systems but it is also suitable for an application in terms of splash water. A strong spray jet with adjustable throughputs of the nozzles as well as an adjustable air-fluid ratio are required.
Note
Standard values for the dilution of LUBRODAL F 318 N with water:
Difficult transformation: 1 : 5 - 10
Average transformation: 1 : 10 - 20
Simple transformation: 1 : 20 - 40
The optimal ratio of dilution has to be determined by operational tests.
Standard values for the dilution of LUBRODAL F 318 N with water:
Difficult transformation: 1 : 5 - 10
Average transformation: 1 : 10 - 20
Simple transformation: 1 : 20 - 40
The optimal ratio of dilution has to be determined by operational tests.
Industries
- Forging
- Forging