產品介紹

PRODUCT INTRODUCTION

產品信息

產品優勢

PRODUCT ADVANTAGE

款式多樣

款式多樣化，各種規格及外包裝，可以提供更多更好的選擇

全新原料

優選新料制成，原料是品質的先決條線，材質決定品質

廠家直銷

高質量高標準生產，可根據您的要求，加工定制

產品細節圖

PRODUCT DETAIL DRAWING

產品包裝

PRODUCT PACKAGING

定制說明

CUSTOM INSTRUCTIONS

混凝土步道板塑料模具-是一種鐵路上常用建材類模具，這種模具與其他的模具不通過，混凝土步道板塑料模具-表面帶有花紋，常見的是鵝卵石花紋或者紋理花紋，所以制作出來的步道磚表面也就帶有花紋，可以起到很好的防滑效果。這種模具在鐵路上的候車站臺使用的比較多。在制作材料方面，混凝土步道板塑料模具-與其他的塑料制品也是不一樣的，一般工程上使用的用聚丙烯材料制作的，但是硬度不如ABS樹脂材料，ABS樹脂材料呈淡黃色，硬度大，是一種高聚物，重量輕，使用壽命按脫模次數計算可以實現脫模200次以上。但是目前市場上銷售的塑料模具很受有達到脫模200次這個目標的，一般都是在150次左右。因?yàn)椴叫邪迥＞呤苁┕l件，儲藏環境等因素的影響，性能有所降低，所以廣大顧客不要輕易相信那些市場上能夠保證脫模次數達到300次的模具生產廠家。在日常使用過程中要注意維護保養，下面是使用的一些要點：制作水泥步道磚要配合使用專門的振搗臺，普通振動棒難以達到模具中水泥混合均勻的要求，另外混凝土步道板塑料模具-在使用后要及時清理，以防止下次使用時破壞水泥構件的標準。塑料雖然具有很好的韌性但是它的脆度也很大，施工過程中模具相互之間的碰撞也會造成損傷。The plastic mold of concrete footpath board is a kind of mold of building materials commonly used in railway. This mold does not pass through other molds. The plastic mold of concrete footpath board has patterns on the surface, commonly pebble patterns or texture patterns. Therefore, the surface of footpath bricks also has patterns, which can play a good anti-skid effect. This kind of mold is often used in the waiting platform on the railway. In terms of manufacturing materials, the plastic mold of concrete walkway board is also different from other plastic products. Generally, polypropylene materials are used in engineering, but the hardness is not as good as ABS resin materials. ABS resin materials are light yellow and have high hardness. It is a high polymer with light weight and service life. It can be demoulded more than 200 times according to the demoulding times. However, at present, the plastic molds sold on the market are very popular, and the goal of demoulding 200 times is generally about 150 times. Because the performance of walking board mold is reduced due to the influence of construction conditions, storage environment and other factors, customers should not easily believe those mold manufacturers who can ensure that the demoulding times can reach 300 times in the market. Attention should be paid to maintenance during daily use. The following are some key points for use: the production of cement walkway bricks should be matched with the use of a special vibrating table. Ordinary vibrating rods are difficult to meet the requirements of uniform cement mixing in the mold. In addition, the plastic mold of concrete walkway plate should be cleaned in time after use to prevent damaging the standard of cement components in the next use. Although plastic has good toughness, its brittleness is also great, and the collision between molds during construction will also cause damage.

購買須知

PURCHASE NOTICE