產品規格型號：CR2032-BS-2-1
產品顏色：黑色塑膠   
插件類型：DIP
材質：PBT ，Cu&SPCC  
標準箱參考參數：3000只；NW 4.5KGS；GW 6.4KGS   44*29.5*33CM

?適用于扣式電池CR2032/LIR2032,ML2032,BR2032 
?非常便于扣式電池的放入和取出，導通性能優良
?可以提供SGS檢測報告，符合環保要求 

●Precautions for Mounting （安裝注意事項）

Unlike other electronic components, Lithium Manganese Dioxide Battery(Coin-type) may be externally short-circuited before and after it is installed in circuit boards and without the power being turned on. This causes power drainage. As a result, the battery may lose its capacity before the equipment is even used. As short-circuits tend to occur in the following cases, please take care when handling the battery.

（不同其它電子零件，鋰-二氧化錳電池（扣式）在安裝到電路板前后可能會外部短路，同時動力未開啟。這會造成動力流失。因此，甚至在設備使用之前電池就可能會損失它的容量。例如短路發生在以下情況下，請謹慎操作電池）

1. Overlapping Batteries （重疊電池）

Lithium Manganese Dioxide Battery is shaped as shown below. It has exposed positive(+)and negative(-) metallic surfaces with a thin cylindrical seal, called the gasket, inbetween them. When the batteries are overlapped or mixed together in a disorderly way, their positive(+)and negative(-)terminals touch each other, causing short-circuits.（鋰-二氧化錳電池形狀如下所示。它敞開的正極與負極間僅僅由一圈很窄的環狀（密封圈）相隔離，當電池雜亂地重疊堆放時，它們的正極 (+)和負極(-)端會相互接觸而造成短路）

2. The Batteries Put in a Metallic Container or on a Metallic Plate

（將電池放入金屬容器或金屬盤里）

Similar to the overlapping battery problem, when the batteries are put in a metallic container or on a metallic plate, their positive(+)and negative(-)terminals may short-circuit through the conductive surface, depending on how the batteries are position.

（與重疊電池問題相似，當電池放到金屬容器或金屬盤里，它們的正極 (+)和負極(-)端可能會通過導電性的表面和電池的位置而造成短路）

3. When The Battery is Held with Metallic Tweezers （當用金屬鑷子夾電池時）

When held with a pair of metallic tweezers as shown, the battery short-circuits through the tweezers.（當用一副金屬鑷子夾電池時，電池通過金屬鑷子短路）