深圳市琦捷電子有限公司主要致力于”出口質量CR1220電池座 “的生產銷售。多年的出口質量CR1220貼片電池座 生產與銷售的經驗,與各行業新老用戶建立了穩定的合作

產品型號： BS-1220-2 SMT 

型號：適用于CR1220電池

塑膠材質：PPA料（耐溫280°-290°） 

五金材質：磷青銅

電鍍處理方式：AU1μ″

裝箱規格：100只x25層=2500只（吸塑包裝）  2500只x4捆=10000只每箱

          10盤*600只每盤，（卷帶包裝）
毛重：10.8KGS          凈重：6.0KGS       裝箱尺寸:40×27.5×31.5㎜

適用產品：設備、 數碼、工控主板、電腦主板，電能表，電子稱，電動玩具，設備，帶有不間斷時間/日期顯示屏的設備、電路板、智能設備、儀器、數碼相框、電子日歷等數碼產品。認證：產品通過SGS、MSDS認證，符合ROHS標準，圖紙規格書齊全，質量。深圳市琦捷電子有限公司還有其他規格的電池座，詳情請聯系如配有CR2032、CR2450、CR2477、CR2430、CR1220等等，CR2032電池座有多種規格可供客戶選擇，生產廠家價格，更多型號可根據客戶要求開模，歡迎來電洽談

●Precautions for Mounting （安裝注意事項）

Unlike other electronic components, Lithium Manganese Dioxide Battery(Coin-type) may be externally short-circuited before and after it is installed in circuit boards and without the power being turned on. This causes power drainage. As a result, the battery may lose its capacity before the equipment is even used. As short-circuits tend to occur in the following cases, please take care when handling the battery.

（不同其它電子零件，鋰-二氧化錳電池（扣式）在安裝到電路板前后可能會外部短路，同時動力未開啟。這會造成動力流失。因此，甚至在設備使用之前電池就可能會損失它的容量。例如短路發生在以下情況下，請謹慎操作電池）

1. Overlapping Batteries （重疊電池）

Lithium Manganese Dioxide Battery is shaped as shown below. It has exposed positive(+)and negative(-) metallic surfaces with a thin cylindrical seal, called the gasket, inbetween them. When the batteries are overlapped or mixed together in a disorderly way, their positive(+)and negative(-)terminals touch each other, causing short-circuits.（鋰-二氧化錳電池形狀如下所示。它敞開的正極與負極間僅僅由一圈很窄的環狀（密封圈）相隔離，當電池雜亂地重疊堆放時，它們的正極 (+)和負極(-)端會相互接觸而造成短路）

2. The Batteries Put in a Metallic Container or on a Metallic Plate

（將電池放入金屬容器或金屬盤里）

Similar to the overlapping battery problem, when the batteries are put in a metallic container or on a metallic plate, their positive(+)and negative(-)terminals may short-circuit through the conductive surface, depending on how the batteries are position.

（與重疊電池問題相似，當電池放到金屬容器或金屬盤里，它們的正極 (+)和負極(-)端可能會通過導電性的表面和電池的位置而造成短路）

3. When The Battery is Held with Metallic Tweezers （當用金屬鑷子夾電池時）

When held with a pair of metallic tweezers as shown, the battery short-circuits through the tweezers.（當用一副金屬鑷子夾電池時，電池通過金屬鑷子短路）