品牌 華升
類型 淀粉機
配用動力 5.5KW
電源電壓 380(V)
重量 130(kg)
出料粒度 0.6-10(mm)
售后服務 整機保修一年
產量 時產1.5至2
適用對象 薯類、稻谷、玉米等
是否跨境出口 否
商品介紹
公司簡介
我廠位于連霍高速鞏義東出口處,東約500米。是生產各種薯類產品的廠家。我廠生產的薯類淀粉加工設備,具有經久耐用、動力小、效率高,省電、省力、用人少,生產加工成本低,對縣、鄉、村集體和個人都適用。多年來,我廠產品暢銷全國各地,深受廣大用戶好評。
Company profile
I plant is located in Lianhuo highway Gongyi east exit, about 500 meters east. Is the production of various potato products m anufacturers. The potato starch processing equipment produced by our factory has the advantages of durability, sm all power, high efficiency, power saving, labor-saving, less employing, and low production and processing cost, which is applicable to the county, township, village collective and individual. Over the years, our products sell well all over the country and are well received by the m ajority of users.
薯類漿渣分離機可用于加工番薯、木薯、馬鈴薯、蕉藕及其它根莖作物的磨碎、漿渣分離作業,具有結構簡單,一次完成薯類的漿渣自動分離等優點。
鮮薯淀粉機采用先進的猬式輥,將鮮薯通過高速旋轉的鮮薯刨成細絲狀,無塊狀、皮丁,且碎渣少,不堵塞過濾網,有利于淀粉的提取,提高了淀粉提取率,且色好,同時釘刺鋒利耐磨,了作業的連續性。也可以隨時抽區分離出的淀粉廢水,有利于重復利用漿液,減少淀粉生產過程中的污染。
使用要求
1.危險機器運轉時,不得拆下防護罩,防止傳動裝置纏繞手或手臂。
2.警告用電機做動力時,應電源觸點免遭水濺。
3.安裝時請注意方向,箭頭方向旋轉,不得反轉。
The utility model has the advantages of s i m p l e separation of potato pulp and potato residue, and can be used for the separation of potato pulp and potato residue.
The advanced hedgehog roller is used in the fresh potato starch m achine. The fresh potato is sliced into fine fila ments through the high-speed rotating fresh potato. It has no block and pitching, and has less broken residue and does not block the filter screen. It is conducive to the extraction of starch, improves the extraction rate of starch, and has good color. Meanwhile, the sharp and wear-resistant nails ensure the continuity of operation. The starch wastewater can also be extracted at any time, which is beneficial to reuse the slurry and reduce the pollution in the process of starch production.
Use requirements
1. When the dangerous m achine is running, do not remove the protective cover to prevent the transmission from winding the hand or arm.
2. When the motor is used for power supply, the power supply contact shall be protected from water splashing.
3. Please pay attention to the direction of installation. The direction of the arrow should be rotated and should not be reversed.
聯系方式