紅薯打粉機 蓮藕粉薯類磨碎機 全自動型紅薯打粉機廠家

華升牌淀粉機屬全封閉節能型，結構合理，性能優良，造型美觀，具有自動進料，破碎分離，排渣，省時省工，更換篩網的時間可在半個小時內完成，提高了淀粉的提粉率，淀粉提取率在 98 以上，此輥帶水生產，使淀粉純白度更高，該機每小時生產量1.5-3dun，可操作性強

華升牌淀粉分離機一次完成鮮薯的粗破碎、細磨漿、漿渣分離，廣泛應用于各中、小規模淀粉廠及家庭用戶的運用。

華升牌淀粉機結構簡單，使用方便，運轉平穩，生產率高，維修便利。能夠一次完成鮮薯的粗破碎、細磨漿、漿渣分離三道工序，能夠重復利用漿液，減少了淀粉生產過程中的廢水。

紅薯淀粉分離機改變了手工生產淀粉時因氧化造成的淀粉光彩變差、變暗的現象;加工過程中被破碎打垮的粉渣在顯微鏡下呈絲狀，有利于淀粉從纖維上游離出來，因此進一步提高了淀粉的提取率。  

Sweet potato flour beater lotus root flour potato grinder automatic sweet potato flour beater manufacturer

Huasheng brand starch machine is a fully enclosed energy-saving type, with reasonable structure, excellent performance, beautiful shape, with automatic feeding, crushing and separation, slag discharge, saving time and labor. The screen screen can be changed in half an hour. The starch extraction rate is 98 The production capacity of the machine is 1.5-2 Dun per hour, electric motor. It can be directly installed in front of the four-wheel tractor, walking tractor and motor supporting use. The machine is easy to install, use, maintain and move. It is an ideal equipment for individual households.

Huasheng starch separator is widely used in small and medium-sized starch factories and household users.

Huasheng starch machine has the advantages of simple structure, convenient use, stable operation, high productivity and convenient maintenance. It can complete three processes of fresh potato coarse crushing, fine refining and pulp residue separation at one time. It can reuse the slurry and reduce the waste water in the starch production process.

Sweet potato starch separator changes the phenomenon that starch luster becomes poor and darkens due to oxidation when starch is produced by hand; the broken powder residue in the processing process is filiform under the microscope, which is conducive to the starch dissociation from the fiber, so the extraction rate of starch is further improved.

Potato milling equipment is mainly composed of screw cleaning machine, planer separator, grinding separator, slag slurry separation combined screen and blender. It is especially suitable for processing potato and sweet potato starch in township enterprises and households.

The operator can work only after mastering the performance, mechanical structure and operation rules of the equipment. In case of equipment failure during operation, the following repair and maintenance measures shall be taken:

When using the separator, the disc clearance should be adjusted to about 0.5mm. During operation, the upper handle should be screwed tightly, and then it can be backed back 90 degrees. If the main shaft of the crushing separation and pulp separator collides, the machine should be stopped for inspection immediately. If the bearing is damaged, the bearing of the same type should be replaced in time; the pulverizing unit works If it is found that the ammeter of the crushing separator is overloaded for a long time, the feeding amount of the cleaning machine should be adjusted.

Special attention is: Planer separator and grinding separator must strictly prevent iron and stone and other hard debris into the machine, so as to avoid damage to machine parts.

Main points for maintenance and repair of the whole machine: lubricating oil and grease should be added to the drive bearings of small potato milling equipment, especially the oil cups at both ends of the main shaft of the grinding separator and the planer separator. Calcium based grease should be added once every 48 hours of operation, and the whole machine should be maintained regularly once a month;

All electrical equipment and driving belts on the single machine of pulverizing unit shall not be wet or watered, so as to avoid short circuit or belt slipping accident; if the transmission belt is found to be slipping, the belt wheel gauge shall be adjusted in time to make the belt tight; the wire mesh under the screw of the cleaning machine is easy to be damaged after a certain period of time, and it shall be renewed after processing 500000 kg of fresh potatoes; the rack of the device on the shaving drum is used to make the belt tight After using for a period of time, if it is found that the production efficiency decreases and the powder slag becomes coarse, the rack should be removed and replaced with a new tooth on the other side for continuous use; after the potato flour milling unit is out of service, the whole machine should be repaired and maintained, and the bearing should be cleaned and filled with lubricating oil and grease. All electrical equipment should be provided with moisture-proof measures to avoid affecting the performance and service life of the equipment.

歡迎電話咨詢或到廠考察試機，聯系電話13014610089