UH-818 是一款100% 固含、反應型熱熔聚氨酯（HMPUR）膠粘劑，專為紡織品內衣定制化復合工藝生產線而設計的。粘接性能高于傳統硅膠。

UH-818 is a solvent-free reactive hotmelt polyurethane (UHPUR) adhesive，specially designed for underwear/bras application.

粘劑強度好： 該產品能夠?qū)Π◤椥阅猃埐荚趦?nèi)的紡織品面料有很好的附著力

Adhesion:   This product has great adhesion on nylon and  other textile meterials.

開放時間：UH-818在環境溫度下(23^oC )的開放時間長,  在使用環境溫度15-35 ^oC下不透膠，點膠膠條光滑美觀。

Open time：This product shows long open time， beautiful glue-line appearance,  no penetration through fabrics when used at ambient temperature between 15-35 ^oC

使用溫度低：UH-818膠線擠出為100-110^oC ，壓合溫度在40-60^oC 之間。 

Low temperature use: This product can be used at as low as 100-110^oC,  the press temperature is about 40-60^oC.

回彈性能好：產品UH-818具有較好的柔軟性及回彈性能,  完美取代鋼圈和硅膠工藝。

Soft and elastics： UH-818  has good elasticity and softness after fully cured and it is idea product as replacement for metal ring and silicon adhesive.

真空包裝于20公斤鋁箔袋中，包裝內產品經強化防結皮處理。

Packed in 20kg  straight container with aluminum foil liner . Product is special treated to prevent from skining.

始終貯存在原裝密閉的容器中,  產品需室內保存，避免與潮氣接觸。開桶的產品應盡快用完. 

Always keep material in closed container and store the package in dry condition. Do not exposure to wet or any moisture. The opened package shall be used as soon as possible

UH-818  可以在 0-35 ^oC溫度下密封干燥貯存6個月, 不會影響使用性能。 

This product can be stored under sealed、 dried condition for 6 months at  0-35 ^oC .

請在使用前閱讀本說明書及詢問安全使用事項。不明之處，請咨詢道那特公司代表。請保持原包裝標簽，并讓使用該產品的所有操作員知道操作規范及安全注意事項。以上參數或博錦高分子給出的建議性的意見是根據內部測試環境而給出的，但是由于應用環境不為我方所控，操作不當將會造成該產品性能行為改變或影響所粘結的產品質量, 其造成的損失將由使用方承擔。

Read instruction and consult with DAT representative for any question before use, such as application condition, safety and cleaning procedures.  Keep the original label in container. Any recommendations contained herein or any information given by any Bojin representative is based on internal test condition and that information believed to be accurate. However, since we have no control over the conditions under which our products are transported, stored, handled, any damage by mishandling or operation will be user’s responsibility. 

影響產品的粘結質量的因素很多，除了膠粘劑本身因素外還常常與基材來源， 批次變化，基材表面特性（如處理劑、材料厚度、脫模劑、平整度）設備的溫度設置 、實際膠溫、溫濕度變化、上膠量、膠點大小、過濾系統、預熱基材程度、壓合條件、操作人員技能、操作規范、機器工況、 養生條件（溫度+濕度+時間）等有關。要求用戶在批量生產前先做樣板測試，待確認后再做大貨，必要時可以告知我方共同參與測試以保證粘接品質。                                                                                                                       Many factors could have impact to product quality, we strongly suggest do trial test before massive production. Please to be sensitive to all condition changes. We will be happy to assist if needed in order to assure good quality.