＜WARNING＞  ＜警告＞

(1)Never charge the battery. Charging the battery may cause seethe of the battery electrolyte or increase of the battery internal pressure. Leakage, heating, explosion or ignition of the battery may be caused as a result of it.（切勿對電池充電。對電池充電會導致電池電解液沸騰或增加電池內部壓力。正因如此，可能會導致電池漏液，發熱，爆炸或著火）

(2)Keep away from infants. If infant happens to swallow the battery, consult a doctor

     Immediately. （遠離小孩。如果發生小孩吞食，請立即咨詢醫師）

(3)In case of eye contact with the battery electrolyte, immediately flush eyes thoroughly with water, and consult a doctor.

     （萬一電池電解液入眼，立即用水徹底地沖涮眼睛并咨詢醫師）

(4)In case the battery electrolyte happen to come into mouth, gargle well enough and consult a doctor immediately. （萬一電池電解液入口，充分地漱口并立即咨詢醫師）

(5)Do not heat or disposed in fire or water. Do not modify or disassemble the battery. It may damage the gasket, and may cause ignition, heating, leakage or explosion.

  （切勿加熱或丟入火、水中處理。切勿改變或分解電池。這樣做可能會破壞密封膠圈，從而導致著火，發熱，漏液或爆炸）

(6)Do not short-circuit positive (+) and negative (-) terminals. Keep away from metal or other conductive materials. Jumbling the batteries of direct contact with positive (+) and negative (-) terminals and metal or other conductive materials may cause short.

     （切勿讓正極(+)、負極(-)端短路。遠離金屬或其它導電性的材料。把電池與金屬或其它

         導電性的材料混在一起而使電池正極(+)、負極(-)端直接接觸會導致電池短路）

(7)When the battery is stored or disposed, isolate positive (+) and negative (-) terminals of the battery to avoid those terminals touch each other.

     （當電池要被保存或處理，隔離電池的正極(+)、負極(-)端以免這些接線端相互接觸）

(8)Insert the battery with positive (+) and negative (-) terminals correctly oriented.

  （按正確的正極(+)、負極(-)端方向嵌入電池）

3V扣式帶焊插腳電池標稱電壓3V,是干電池的2倍,它采用化學性質非常穩定的二氧化錳為正極材料和比能量非常高的鋰為負極材料。年自放電率低于2%，儲存壽命長。電池采用合理密封結構和材料,氣密性良好,使用很。鋰錳電池具有溫度寬的特點,在-40℃-+80℃下電池均能正常工作,有效存儲期為一年。鋰錳扣式電池廣泛適用于電腦主機板、電子詞典、照相機、遙控器、耳溫槍、血糖測試儀、體脂肪測試儀、汽車輪胎壓力計、電子稱、萬年歷、玩具、鐘表、考勤機、MP3、收音機、電子閃光產品等。 公司的產品品種及規格如下： 3V扣形帶焊插腳電池：CR2032/1HF、CR1616/1F2、CR2016/1F2、CR2032/1F4、CR2330/1HF、CR2330/1VC、CR2354/1HF、CR2354/1GU、CR1225/1HC、CR1225/1VC、CR1632/1HF、CR2032/1GU、CR2032/1HE、CR2032/1F2、CR2325/1HG、CR2330/1HE等等規格型號 我們可以為各種型號的電池加工上焊腳，根據客戶的圖紙、電池樣品。可準時在國內交貨，請貴公司確定所需規格、數量及交貨方式，我公司將盡快給予報價，若需樣品及規格書請告知。