臺灣HYDROMAX新鴻齒輪泵PR1-090,PR1-011,PR1-012





臺灣新鴻HYDROMAX單聯齒輪泵HGP系列型號如下:
HGP-1A-F0.5R,HGP-1A-F0.8R
HGP-1A-F1R,HGP-1A-F2.6R
HGP-1A-F2R,HGP-1A-F3R
HGP-1A-F4R,HGP-1A-F5R
HGP-1A-F6R,HGP-1A-F8R
HGP-2A-F2R,HGP-2A-F5R
HGP-2A-F3R,HGP-2A-F4R
HGP-2A-F5R,HGP-2A-F6R
HGP-2A-F8R,HGP-2A-F9R
HGP-2A-F11R,HGP-2A-F12R
HGP-3A-F4R,HGP-3A-F6R
HGP-3A-F8R,HGP-3A-F11R
HGP-3A-F13R,HGP-3A-F14R
HGP-3A-F17R,HGP-3A-F19R
HGP-3A-F23R,HGP-3A-F25R
HGP-3A-F28R,HGP-3A-F30R
HGP-05A-F03R,HGP-05A-F05R
HGP-05A-F08R,HGP-05A-F11R
HGP-05A-F03L,HGP-05A-F05L
HGP-05A-F08L,HGP-05A-F11L
HGP-22A-F2R,HGP-22A-F3R
HGP-22A-F4R,HGP-22A-F5R
HGP-22A-F6R,HGP-22A-F8R
HGP-22A-F9R,HGP-22A-F11R
HGP-22A-F12R,HGP-33A-F3R
HGP-33A-F4R,HGP-33A-F6R
HGP-33A-F8R,HGP-33A-F11R
HGP-33A-F13R,HGP-33A-F14R
HGP-33A-F17R,HGP-33A-F19R
HGP-33A-F23R,HGP-33A-F25R
HGP-33A-F28R,HGP-33A-F30R
PR1-020,PR1-030,PR1-040
PR1-050,PR1-060,PR1-080
PR1-090,PR1-011,PR1-012
PR2-010,PR2-020,PR2-030
PR2-040,PR2-050,PR2-060
PR2-080
比例閥： 電液比例先導溢流閥、電液比例溢流閥、電液比例溢流調速閥
不同的粉料，由于物理性質不同，斜槽的傾斜度有所不同.一般斜度為4％―6％；當用于電廠干灰集中設備時空氣斜槽的安裝斜度不應小于6％?？諝庑辈鄣亩嗫装宀牧弦话銥樗?、化纖織物、多孔陶瓷等。粉料流態化所需要的風量，由專用小型離心式風機提供，也可接至送風機出口。風壓一般為3―5kPa，若風壓太小，則灰層不能達到理想的流態化效果；否則會破壞灰層的結構，造成氣化不均勻，以至出現局部粉塵被高速氣流帶走，而其他部位發生堵灰的情況。