電力是當今社會生產生活的主要?jiǎng)恿碓矗S著當今城市規模不斷擴大以及現代化生產程度日趨提高，輸供電系統呈現出：供電網絡龐大，供電系統復雜，供電環節多，供電距離長等特點。電纜中間接頭作為整個供電網絡的重要接續點，其運行穩定性將直接影響到供電系統的運行質量，由于電纜中間接頭是由人工在現場安裝完成的，受到施工環境和運行環境的影響，不可避免的會因?yàn)榘惭b失誤、外力破壞、電纜進水等原因造成擊穿和爆炸事故。而且在電纜接頭發生擊穿和爆炸事故時會釋放出大量的能量，對周邊其它電力設施或人員造成危害，甚至?xí)斐啥问鹿实陌l(fā)生，針對這些問題，上海朋源電氣設備有限公司研制開發了具有防火、防水、防爆作用的電纜中間接頭盒，進行全方位防護，一旦電纜中間接頭發生爆炸或擊穿，可以對周邊其他電力設施以及人員進行有效的保護，防止二次傷害的發生。

Electric power is the main power source of production and life in today&＃39;s society. With the continuous expansion of urban scale and the increasing level of modern production. The power supply system presents: huge power supply network, complex power supply system, many power supply links, Long power supply distance and etc. Cable intermediate joint as important connection point of the whole power supply network, the operation stability will directly affect the running quality of power supply system, due to the cable intermediate joint is completed by manual installation at the scene, Under the influence of construction environment and operation environment, breakdown and explosion accidents will inevitably occur due to installation error, external damage, cable water inlet and other reasons. In addition, a large amount of energy will be released when the cable joint breaks down and explodes, which will cause harm to other surrounding power facilities or personnel, and even cause the occurrence of secondary accidents, aiming at these problems, Shanghai friends source electrical equipment Co., Ltd. has developed the cable intermediate connector box with the functions of fire prevention, waterproofing and explosion-proof, which can carry out all-round protection. In case of explosion or breakdown of the cable intermediate connector, it can effectively protect the surrounding power facilities and personnel and prevent the occurrence of secondary damage.

技術特點/Technical characteristics：

1、公司產品外殼采用玻璃鋼，玻璃鋼是各向異性的材料，加上其配方和添加物等有廣泛的選擇性，根據玻璃鋼工作的環境和狀態，添加了特制的阻燃添加劑，使玻璃鋼材料有良好的阻燃性，試驗結果如下：

The shell of products is made of glass fiber reinforced plastics, which is anisotropic material. Besides, the formula and additives are widely selected, according to the working environment and state of glass fiber reinforced plastics, special flame retardant additives are added to make the glass fiber reinforced plastics have good flame retardant property. The test results are as follows:

玻璃鋼屬復合材料，它對酸、堿、鹽、油等各種腐蝕介質都有特殊的防止功能，且不會發生銹蝕。滿足沿海地區和化工場所及長期直埋地下的要求。產品性能保證附件產品能夠長時間穩定運行。  FRP is a high-quality composite material, it has a special function to prevent acid, alkali, salt, oil and other corrosive media, and will not rust. Meet the requirements of coastal areas, chemical sites and long-term direct buried underground. The product performance ensures that the accessory products can run stably for a long time.

2、在防爆殼的結合部分采用硅橡膠密封圈對殼體進行密封，增強電纜中間接頭的防水性能。

Silicone rubber sealing ring is used in the joint part of the explosion-proof shell to seal the shell and enhance the waterproof performance of the cable intermediate joint.

3、具有很強的耐壓性能，殼體可以承受來自內部或外部的超強沖擊。

The shell can withstand the strong impact from inside or outside.

4、安裝方便快捷，可以滿足110kv、220kv單芯電纜敷設要求。

Easy and fast installation, can meet the 110kV, 220kV single core cable laying requirements.

5、安全可靠，廣泛適用于電力、煤炭、化工等各種高危行業及重點工程的供電網絡。

Safe and reliable, widely used in power, coal, chemical and other high-risk industries and key projects power supply network.   

安裝說明如下Installation instructions are as follows：

1.準備工作/Preparation

1.1檢查所配玻璃鋼外殼適用的規格和尺寸與電纜的外徑和中間頭的配合尺寸是否吻合；

Check the applicable specifications and dimensions of the FRP housing to see if consistent with the outside diameter of the cable and the matching size of the middle head.

1.2檢查玻璃鋼外殼的密封材料(哈呋開口的密封墊，玻璃鋼外殼兩端口與電纜的密封材料：帶材)是否充足；

Check whether the sealing material of the FRP housing (Hafuran open gasket, FRP housing two ends and cable sealing material: strip) is sufficient

1.3檢查高壓電纜密封膠兩組份電纜膠包裝是否完整，組份的數量是否充足；

Check whether the packing of the two-component cable sealant is complete and the quantity of the components is sufficient;

2.玻璃鋼外殼的裝配/Assembly of FRP housing

對待安裝的玻璃鋼外殼的中間接頭段清潔處理，裝上玻璃鋼外殼的上下半，引出同軸電纜或接地電纜，上緊若干個螺栓，防爆盒兩端口和同軸電纜或接地電纜必須先做密封處理(包防水密封帶材)；

The intermediate connector section of the installed FRP shell shall be cleaned, the upper and lower half of the FRP shell shall be installed, coaxial cable or ground cable shall be drawn out, and a number of bolts shall be tightened. The two ports of the explosion-proof box and coaxial cable or ground cable shall be sealed first (waterproof sealing strip).

2.1拿一個干凈的桶，將兩組份高壓電纜密封(AB膠）倒在干凈的桶中，合在一起用電動攪拌機攪拌均勻；

Take a clean bucket, pour the two-component high voltage cable seal (AB glue) into the bucket and mix together with an electric mixer;

2.2灌膠：灌膠要注意它的連續性，每組膠灌入的間隔的時間越短越好；灌膠時請注意漏膠；

注意：高壓電纜密封膠的雙組份電纜膠在其固化過程中略有些體積膨脹，所以不能灌的太滿，一般灌到低于灌膠口上沿20至30mm的高度；

Glue filling: the continuity of glue filling should be paid attention, the shorter the time interval between each group of glue filling, the better; Please pay attention to glue leakage when filling;

Note: the two-component cable glue of the high-voltage cable sealant has a little volume expansion during its curing process, so it should not be filled to a height of 20 to 30mm lower than the top edge of the sealant.

3.封蓋口，安裝完畢。

Sealing mouth, installation completed.