在生態階梯護坡模具設計方法與說明中，有一點比較重要的是初次接觸此類生產護坡模具的時候，往往在具體操作上會存在很多疑點，尤其是模具的脫模問題，因為該模具與其他鋼模具不同的是內部呈現空心構造，所以如何保證將完整的生態階梯護坡模具脫模不來，而混凝土預制塊不會發生損害，是廠家對于預制廠或者生產此類預制塊的施工單位責任體現。那么如果在生態階梯護坡模具使用程序里面，脫模一項是如何操作的呢？按照廠家實際提供的可靠性參考經驗，往往在混凝土凝固以后，先是將兩側的模板打開(模具四周都是可以打開的)，然后將模具倒過來后，拆掉另外一塊主板（仿石花紋的這塊不能動），然后將內模吊裝出來后將仿石花紋這塊拆掉，這樣就形成了完成的階梯式護坡磚。這種拆模仿石也摒棄了過去直接將預制塊吊裝出來的方式，更加完整的保留預制塊與圖紙的相同，從而在表面效果以及使用安裝效果上都達到非常好的一個狀態。In the design method and description of ecological step slope protection mold, it is important that there are often many doubts in the specific operation when contacting this kind of production slope protection mold for the first time, especially the demoulding problem of the mold, because the mold is different from other steel molds in that it has a hollow structure, so how to ensure that the complete ecological step slope protection mold will not be demoulded, The concrete precast blocks will not be damaged, which reflects the manufacturer's responsibility for the precast plant or the construction unit producing such precast blocks. So how does demoulding work in the application procedure of ecological ladder slope protection mold? According to the reliability reference experience actually provided by the manufacturer, after the concrete is solidified, first open the formwork on both sides (all sides of the mold can be opened), then turn the mold upside down, remove another main board (the stone like pattern cannot be moved), and then lift out the inner formwork and remove the stone like pattern, In this way, the completed stepped slope protection brick is formed. This kind of formwork removal and stone imitation also abandons the way of directly hoisting the precast blocks in the past, and more completely retains the same precast blocks as the drawings, so as to achieve a very good state in surface effect and use and installation effect.