預制隔離帶模具—水泥隔離帶模具—隔離帶模具—宏旭模具一般設置在公路的車行道路、人行道路、速公路、停車場等地。那么預制隔離帶模具—水泥隔離帶模具—隔離帶模具—宏旭模具主要在哪里，隔離墩模具自從被用作交通平安設施后。有什么用呢?人行道設置：人行道設置的隔離設施起保護行人在人行道上有秩序地活動，并有防止行人任意步入和橫穿車行道的作用。人行道隔離設施的形式主要是綠化分隔帶和人行道護欄。市區范圍內，人行道寬度大于2.5m時，優先選取的形式依次為綠化分隔帶、人行道護欄，當人行道寬度不大于2.5m時，人行道隔離設施應選擇設置人行道護欄。車行道設置：車行道隔離設施是用來分隔對向或同向行駛的交通流，并有禁止車輛左轉進出行駛和行人任意穿越道路的作用，一般設置在道路中心線上或車道分隔線上。車行道隔離設施分為車行道中心隔離設施(分隔對向)和車行道分界隔離設施(分隔同向)車行道隔離設施主要采用三種形式：綠化分隔帶、隔離護欄、混凝土防撞墻。Prefabricated isolation belt mold - cement isolation belt mold - isolation belt mold - Hongxu mold is generally set up in the vehicle road, pedestrian road, expressway, parking lot and other places of the highway. Where are the prefabricated isolation belt molds - cement isolation belt molds - isolation belt molds - Hongxu molds? Since the isolation pier molds have been used as traffic safety facilities. What's the use? Sidewalk setting: the isolation facilities set on the sidewalk can protect pedestrians from moving orderly on the sidewalk and prevent pedestrians from entering and crossing the roadway arbitrarily. Sidewalk isolation facilities are mainly in the form of green separation belt and sidewalk guardrail. Within the urban area, when the sidewalk width is greater than 2.5m, the preferred forms are green separation belt and sidewalk guardrail. When the sidewalk width is not greater than 2.5m, sidewalk guardrail shall be set for sidewalk isolation facilities. Roadway setting: roadway isolation facilities are used to separate the traffic flow in opposite or same direction, and prohibit vehicles from turning left in and out and pedestrians from crossing the road arbitrarily. They are generally set on the road center line or lane separation line. Roadway isolation facilities are divided into roadway center isolation facilities (separation opposite direction) and roadway boundary isolation facilities (separation in the same direction). Roadway isolation facilities mainly adopt three forms: green separation belt, isolation guardrail and concrete anti-collision wall.