碼頭扭王字塊模具介紹是依據對不同類型以及尺寸的扭王字預制塊進行鋼模具的生產，呈現四腳凸出的樣式，雖然外形大體一致，但是尺寸根據不同噸位大小的混凝土扭王字塊而不同。該模具主要是采用人工預制的方式進行使用，并且在灌料口等待泥漿震動均勻后，放入一個提前彎折好的吊環，等待泥漿凝固后輕松拆模就可以了。

形狀說明：

碼頭扭王字塊模具其實單個來看形狀非常的怪異，一個“王”字，中間的一橫橫向旋轉九十度突出，看著十分的不協調，但是往往是這種不協調的預制件，對于海邊的一些海浪預防卻有著良好的施工效果。大量的扭王字塊按照順序擺放形成防浪墻類型，從海岸線開始沿出去百米左右，大量的扭王字塊會呈現奇特的美觀感覺。

模具性能：

碼頭扭王字塊模具一般都是八塊拼接或者是十塊拼接，在組裝模具的時候需要用到電動扳手進行螺栓的擰緊，然后根據順序完成刷油、灌漿、震動以及晾曬的步驟，泥漿凝固后就可以拆開模具了。扭王字塊模具、消浪石模具、四腳空心塊模具這些同屬于防浪石一類，并且都是為鋼模具，在加工的時候都有著同樣的使用方式，但是要注意的是，鋼模具在脫模完成后要進行清理刷油存放。The introduction of the die for wharf Accropode is based on the production of steel die for different types and sizes of Accropode precast blocks, showing a four legged protruding style. Although the shape is roughly the same, the size is different according to different tonnage of concrete Accropode. The mold is mainly used by manual prefabrication, and after the slurry is evenly vibrated at the filling port, a bent lifting ring is put in advance, and the mold can be easily removed after the slurry is solidified.

Shape description:

In fact, the shape of the mold of the wharf's twisted King shaped block is very strange from a single point of view. A "King" shaped block, with a horizontal rotation of 90 degrees in the middle, looks very incongruous, but it is often this kind of incongruous prefabricated piece, which has a good construction effect for the prevention of some sea waves on the beach. A large number of accropodes are placed in order to form a wave wall type. About 100 meters from the coastline, a large number of accropodes will present a strange aesthetic feeling.

Mold performance:

Generally, the die of wharf's zigzag block is made up of eight pieces or ten pieces. When assembling the die, an electric wrench is used to tighten the bolts, and then the steps of oil brushing, grouting, vibration and drying are completed according to the sequence. After the slurry solidifies, the die can be disassembled. Twist Wang block mold, xiaolangshi mold, four foot hollow block mold all belong to the same category of anti wave stone, and they are all steel molds, which have the same way of use when processing, but it should be noted that the steel mold should be cleaned and stored after demoulding.