水泥箱式生態護坡模具的原料介紹與使用方式會進行詳細的介紹，模具使用的是鋼板作為它的主要生產原料，使用水泥箱式生態護坡模具生產出來的箱式護坡簡單來說相當于把一個變電站放到一個鋼板做的房子內，箱式護坡是可以全部整體移動的，使用起來非常的方便，變壓線需要安裝在干凈、干燥、防鼠、全封閉的地方。

使用準備：

一些灰塵或者是雜質的黏連會影響到模具的使用，也會影響水泥箱式生態護坡模具的質量，工人要將模具清理干凈，并且核對可使用模具的尺寸與型號，避免模具的尺寸出現了誤差，影響到生態護坡磚的正常制作。檢查模具無誤后就需要正常進行應用了，無論是鋼模具還是塑料模具的應用都是要進行刷油的，不單單是起到一個潤滑的效果，更多的是進行模具內腔的保護，

加工過程：

因?yàn)檎麄€(gè)制作過程基本都是在使用模具生產，施工人員只要按照具體的步驟進行生產就可以了，跟很多的鋼模具的使用方式相同，但是注意需要提前把制作場地收拾干凈，避免模具沾水，或者制作場地不干凈造成模具受損的現象出現，水泥箱式生態護坡模具的尺寸不是固定的，施工人員可以根據自己的真實工程需求跟模具制作工廠進行溝通制作出符合自己工程的模具。The introduction and use of cement box ecological slope protection mold materials will be introduced in detail. The die uses steel plate as its main production material. The box slope protection produced by using box slope protection mold is simply equivalent to putting a substation in a steel plate house. The box slope protection can be moved as a whole and it is very convenient to use, The pressure changing line shall be installed in a clean, dry, rat proof and fully enclosed place.

Preparation for use:

Some dust or impurities will affect the use of the mold, and also affect the quality of the cement box ecological slope protection mold. Workers should clean the mould, check the size and model of the available mold, avoid the error of the mold size and affect the normal production of ecological slope protection brick. After checking the mold is correct, it needs to be applied normally. Whether it is used in steel mold or plastic mold, it is necessary to brush oil, not only to play a lubrication effect, but also to protect the inner cavity of the mold,

Processing process:

Because the whole manufacturing process is basically using mold production, the construction personnel can only follow the specific steps to produce, and the same as many steel mold use methods, but pay attention to the need to clean up the production site in advance to avoid mold water, or the mold damage caused by the unclean manufacturing site, The size of the box slope protection mold is not fixed. The construction personnel can communicate with the mold manufacturing factory to make the mold which conforms to their own project according to their real engineering needs.