高鐵軌枕模具

1、高鐵軌枕模具又稱為：道軌模具、路軌模具、枕木模具 2、軌枕模具材質：軌枕鋼模具 特殊的尺寸可定做鋼模具，鋼模具是可拆卸模具，出?？?。 3、高鐵軌枕模具使用方法：首先在軌枕模具內壁噴一層機油或是脫模劑，方便脫模，然后將攪拌好的混凝土或水泥灌入軌枕模具內，盡量填滿每個縫隙邊角，其次，在震動平臺上震動或用振動棒振搗，幾秒鐘即可，最后將其放在干燥的地方，等混凝土初期凝固后即可出模成型。 ，在軌枕模具生產領域位列前茅，所生產的產品質量合格、價格優惠、發貨快，可滿足客戶需求。

水泥枕木U型環的軌枕安裝方便，只需將鋼軌放到兩個U型環之間，下面墊上橡膠墊板，然后用大錘砸下U型環壓住鋼軌。水泥枕木螺栓壓板的是用T型螺栓從軌枕下面預留孔中穿出上面固定住壓板壓住鋼軌，一根軌枕需要4套螺栓，4個壓板，2個橡膠墊板，這種軌枕養護方便，可以重復利用High speed rail sleeper mould

1. The high-speed rail sleeper mold is also known as: Rail mold, rail mold, sleeper mold. 2. Sleeper mold material: sleeper steel mold. The special size of the steel mold can be customized. The steel mold is a detachable mold, and the mold can be produced quickly. A kind of 3. Usage of high-speed rail sleeper mould: first, spray a layer of engine oil or release agent on the inner wall of the sleeper mould to facilitate demoulding, then pour the mixed concrete or cement into the sleeper mould to fill the corner of each gap as much as possible, secondly, shake it on the vibration platform or vibrate it with a vibrator for a few seconds, and finally put it in a dry place after the initial setting of the concrete It can be molded. In the field of sleeper mould production, the products are of high quality, low price and fast delivery, which can meet the needs of customers.

The sleeper of U-ring cement sleeper is easy to install. Just put the rail between the two u-rings, pad the rubber pad below, and then use a sledgehammer to knock down the U-ring to press the rail. The cement sleeper bolt pressing plate uses T-bolt to pass through the reserved hole under the sleeper and fix the pressing plate to press the rail. One sleeper needs 4 sets of bolts, 4 pressing plates and 2 rubber plates. This kind of sleeper is easy to maintain and can be reused