Applications where the sulphur level is below 1.5% require special consideration and should be discussed with
your ExxonMobil representative.
Appropriate feed rates should be verified in all cases by through-the-ports inspection of liners for adequate oil
film.
Typical Properties
SAE Grade 50
Specific Gravity at 15oC 0.937
Flash Point, oC, ASTM D 92 256
Pour Point, oC, ASTM D 97 -9
Viscosity, ASTM D 445
cSt, at 40oC 222
cSt, at 100oC 20
Viscosity Index, ASTM D 2270 104
TBN, mg KOH/g, ASTM D 2896 70
Health and Safety
Based on available information, this product is not expected to produce adverse effects on health when used
for the intended application, following the recommendations provided in the Material Safety Data Sheet (MSDS).
MSDSs are available upon request through your sales contract office, or via the Internet on
http://www.exxonmobil.com. This product should not be used for purposes other than its intended use. If disposing
of used product, take care to protect the environment.
The ExxonMobil logotype and Mobilgard are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.
ExxonMobil Lubricants & Specialties
All products may not be available locally. For more information, contact your local sales office or visit www.exxonmobil.com.
ExxonMobil is comprised of numerous affiliates and subsidiaries, many with names that include Esso, Mobil, or ExxonMobil. Nothing in this document is intended to override or
supersede the corporate separateness of local entities. Responsibility for local actionand accountability remains with the local ExxonMobil affiliate entities. Due to continual product
research and development, the information contained herein is subject to change without notification. Typical Properties may vary slightly.
(C) 2007 Exxon Mobil Corporation. All rights reserved.