消光粉產品特點：（主要用于油漆、涂料、皮革）

（一）消光效果好，達到同樣啞光和度，使用量較少，可以用來制造半啞、柔光以及全啞涂料。

（二）分散性好，采用普通的高分散機即可生產啞光漆。

（三）透明性好，不會形成霧狀；拉伸不返白不變型。

（四）涂料在貯存期內，不會生成硬沉淀。

（五）對涂料干燥、固化無影響。

（六）對涂料重涂性無影響。

（七）漆膜平整光滑、耐抗劃性、耐沖擊性均很好。

（八）對涂膜的耐久性、耐侯性無影響。

消光粉產品技術指標：

產品特點：

  高透明性

本系列產品采用特殊的表面活性介質包覆處理工藝，大大改善了消光粉的折射率，使其遮光系數達到1.47，使之和樹脂的折射率1.4-1.6更加接近，從而大大提高了產品的透明性。

  高消光率

孔隙率為1.8-2.0毫升/克，并在生產設備和生產工藝上進行了優化，使產品有更窄的粒徑分布，從而大大提高了消光效率。

  高分散性

通過的研磨工藝消光劑在極不利的條件下也非常容易分散，從而縮短操作時間，并且更有利于添加消光劑去調校啞度。

使用方法：

1.如達到感激消光粉的消光效率，建議添加3-10%。

2.由于不同的配方和條件，建議客戶在使用前進行試驗，確定添加量。

注意事項：

1.客戶在裝卸 使用和運輸過程中，采取必要措施，避免粉塵飛揚。建議堆放高度不超過10層，受擠壓會影響產品分散性，請適當延長分散時間。

2.建議使用時開包即用，避免受潮影響使用效果。

  High efficiency:

As TSAseries high-geade delusterant powder improves its porosity to 1.8 and dec reases the distribution of micropores and ultra-large pores,the distribution of pores is more symmetrical and greatly improves the efficiency of delusterant;the diameter is narrower so as to reduce the negative influence of small granules on the effect.

  Good transparency:

The purity of SIO2in TSA SERIES hige-grade delusterant powder reaches 99.3%,and special method is adopted for surface treatment so that its refraction index reaches 1.47,being close to that of colophony,i.e.1.40-1.60,which greatly improves its transparency in coating film and whose transparency is very close to the level of foreign products so as to avoid low-grade delusterant powder s problem of turning white and blue on the surface.

  Easily added and dispersed:

Advanced rubbing technology makes narrower distribution of diameter of granules,so that delusterant can be easily added in any production procedure and can be easily dispersed,which saves the processing time.

TSA series main application:

Hige-grade furniture coatings

Hige-grade decorative coatings

Film coating,such as decoration film,man-made or natural leather

Leather 

Method of Application:

1、Recommended dosage of3%-10%.

2、As different formulations and conditions,suggest the user to test and make sure the dosage before using.

Notes:

1、Customer handling,use and transportation process,should take the necessary measures to avoid dust.Recommended stacking height of not more than 10 layers,by extrusion would affect the dispersion of products,please spread the appropriate extension of time.

2、Recommended to use when opening packages that prevent moisture affect the results.