Amphenol NOVA制動助力器監測背面壓力傳感器模具P1905(0-300psi)

P1905壓阻傳感器芯片設計用于在腐蝕性（苛刻）介質中進行壓力測量。 管芯具有通過將硅帽密封低應力結合到器件晶片的頂側而形成的參考真空室。 通過從模具背面施加壓力，P1905傳感器芯片消除了頂側的傳感器電路與應用介質的直接接觸，允許P1905模具測量腐蝕性液體和氣體中的壓力。 使用NovaSensor的SenStable®工藝，P1905芯片具有出色的長期穩定性和重復性（<0.1％/年典型值）。

應用程序

 汽車系統
 過程控制系統
 航天
 腐蝕性介質中的壓力測量


特征

苛刻介質兼容
高可靠，固態硅壓力傳感器模從腔側受壓
推薦壓力范圍：
0 ... 100 PSIA至0 ... 300 PSIA
模具尺寸（長x寬x高）：
1.93mm×1.93mm×1.64mm
焊盤全部在同一側，便于應用包裝

其他壓力范圍

Specifications

Parameter	Value	Units	Notes
All values measured at 25oC and 5 V excitation, unless otherwise noted. Samples from each wafer are used to verify bridge resistance, offset, span, linearity and die performance in the temperature range between 0oC and 70oC. Backside burst pressure and operating temperature for sensor utilizing P1905 die can be lower than corresponding parameters for the die. Typical span is equal to 160 mV at 300 psi. Best fit straight line. Between 0oC and 70oC. Typical value.
General
Pressure Range	0...100 to 0...300	PSIA
Max. Overpressure	600	PSIA
Backside Burst Pressure	>4000	PSI	6
Electrical @ 25°C Unless Noted
Excitation (DC)	1 5	mA Volt	10VDC Max.
Bridge Resistance	5000 ± 20%	Ω
Environmental
Temperature Range
Operating	-40° to 150°	°C	2
Storage	-55° to 160°	°C
Mechanical
Performance Parameters (1)
	Value	Units	Notes
Zero Offset	± 10	mV/V
Sensitivity	0.107 ± 0.030	mV/V/psi	3
Pressure Linearity	± 0.2	% Span	4
Pressure Hysteresis	± 10	μV/V	5, 6
Temp. Coefficient of Zero	0.5 ± 3	μV/V/C	5, 6
Temp. Coefficient of Resistance	0.27	%/C	5, 6
Temp. Coefficient of Sensitivity	-0.19	%/C	5, 6
Thermal Hysteresis of Zero	± 25	μV/V	5, 6