現澆排水槽模具也有多種不同的尺寸規格,可以根據不同的要求進行生產,現在的科技進步,生產方式改變了以往的生產方式，各地的供求量都比較大，依靠古老的生產方式是遠遠供應不起的,采用高科技的方式既節省了整體的費用，也提高了生產的速度,產品的精美度也是人們所看重的。有的地方除了對質量的要求除外,對于排水槽的外形要求很高,采用全電腦自動化的方式,生產速度大大提高,提高了準確度。

現澆排水槽模具每次用完都需要清潔養護現澆U型排水槽模具日常保養關系到模具的使用次數和生產現澆U型排水槽的質量，在鐵路、高鐵、高速排水槽模具制作使用的過程中，保養模具是非常重要的一個環節，尤其是內部清洗的細節，因為現澆排水槽模具有單槽和雙槽之分，每次脫模后常常預留剩余的混凝土殘渣，單純依靠倒出來，很多殘渣已經附著在上面，倒不出來，所以就需要每使用10次左右，徹底清洗一次，這樣就保證了現澆排水槽模具的清潔性，對于使用次數的增加和生產的混凝土排水溝質量都有很好的保證。The cast-in-place drainage channel mold also has a variety of different sizes and specifications, which can be produced according to different requirements. With the progress of science and technology, the production mode has changed the previous production mode, and the supply and demand of various places are relatively large. Relying on the old production mode is far from affordable. Adopting the high-tech mode can not only save the overall cost, but also improve the production speed, The delicacy of products is also valued by people. In some places, in addition to the quality requirements, the shape requirements of the drainage channel are very high. With the full computer automation, the production speed is greatly improved and the accuracy is improved.

The mold of cast-in-place drainage channel needs cleaning and maintenance every time it is used up. The daily maintenance of the mold of cast-in-place U-shaped drainage channel is related to the use times of the mold and the quality of the production of cast-in-place U-shaped drainage channel. In the process of making and using the mold of railway, high-speed railway and high-speed drainage channel, the maintenance of the mold is a very important link, especially the details of internal cleaning, Because the cast-in-place drainage channel mold can be divided into single groove and double groove, the remaining concrete residue is often reserved after each demoulding, and it can not be poured out simply because a lot of residue has been attached to it, so it needs to be cleaned thoroughly every 10 times, so as to ensure the cleanness of the cast-in-place drainage channel mold, For the increase in the number of use and production of concrete drainage ditch quality has a good guarantee.