組合化糞池模具  樂豐化糞池模具  出?？焖?方便操作

組合式化糞池模具是屬于化糞池模具的一個種類，組合式化糞池模具的產品結構比較合理，便于拆卸和安裝，外形美觀大方，而且很好的對環境起到了改善的作用，該產品的制作工藝簡單，配有不同功能的處理設備，振通模具可提供各種規格型號的大樣圖而且產品的材質都是選擇的優質的原材料制作而成的，在制作的時候需要對化糞池模具所在的場合進行測量才能確定出具體的方案，從而制作出了組合式化糞池模具大樣圖，而且設計的這些結構符合生產的需要，組合式化糞池模具價格合理，振通模具專業的化糞池模具生產廠家。

組合化糞池模具  樂豐化糞池模具 尺寸

150*100*100cm，180*100*90cm，尺寸可以定做，常規體積為1.5立方，中帶隔斷，分三格。

組合化糞池模具  樂豐化糞池模具 施工方案

1、應先選擇化糞池的安裝場地，然后放線開挖，在開挖的時候要嚴格控制蓋度，保證進出水口和化糞池滿足使用生產的要求。

2、我們對地面應該進行處理，處理的要求就是無地下水情況下、原土夯實，而且符合這樣的要求遠遠不夠，我們需要在上面鋪十五厘米左右厚的混凝土，表面要在同一水平線上，允許有誤差，但是誤差應該控制在一厘米以內，在開挖之后發現有有地下水的情況，先排水，在進行基地的夯實，

3、才能抹上一層混凝土，在基地的混凝土完全干燥之后，就可以驚醒安裝化糞池了，將化糞池預制件每組三個擺放在一起，各個化糞池按順序放入基坑，控制好各個底座的水平位置，在生產過程中及時調整。

Introduction of combined septic tank mould

The modular septic tank mold is a kind of septic tank mold. The product structure of the modular septic tank mold is reasonable, easy to disassemble and install, beautiful and generous in appearance, and has a good effect on improving the environment. The production process of the product is simple, equipped with different functional processing equipment, and the vibrating mold can provide various specifications and models of detail drawings and products The materials of the septic tank are all made of high-quality raw materials. When making the septic tank mold, it is necessary to measure the occasion where the septic tank mold is located to determine the specific scheme, so as to make a detailed drawing of the combined septic tank mold. Moreover, the designed structures meet the needs of production, the combined septic tank mold price is reasonable, and the professional septic tank mold production of Zhentong mold is feasible Manufactor.

Mold size of combined septic tank

150 * 100 * 100cm, 180 * 100 * 90cm, the size can be customized, the conventional volume is 1.5 cubic meters, with partition in the middle, divided into three grids.

Production and construction scheme of combined septic tank mould

1. The installation site of the septic tank shall be selected first, and then the setting out excavation shall be carried out. During the excavation, the coverage shall be strictly controlled to ensure that the water inlet and the septic tank meet the requirements of use and production.

2. We should deal with the ground. The requirement of treatment is that the original soil should be compacted without groundwater, and it is not enough to meet such requirements. We need to pave about 15cm thick concrete on it. The surface should be on the same horizontal line, with errors allowed, but the errors should be controlled within 1cm. If there is groundwater after excavation, first Drainage, in the process of base compaction,

3. Only one layer of concrete can be plastered. After the concrete in the base is completely dry, the septic tank can be installed. Put three prefabricated parts of each septic tank together, put each septic tank into the foundation pit in order, control the horizontal position