進口電動籠式單座調節閥德國洛克

一、進口電動籠式單座調節閥描述：

德國《LOCKE》洛克進口電動籠式單座調節閥，采用頂部導向不平衡式結構，高強度、重載荷、S型流道、壓降損失小、流量系數大、可調范圍廣、流量特性精度高。該類型調節閥適用于工況允許壓差小、閥前后壓差較大的工作場合，關閉嚴密，適用于對介質流量或者壓力的調節。本系列產品有常溫型、高溫型、低溫型、調節切斷型、波紋管密封型等多種型式。

The electric cage type single seat regulating valve imported from Germany "locke" adopts top guiding unbalanced structure, with high strength, heavy load, S-type flow channel, small pressure drop loss, large flow coefficient, wide adjustable range and high flow characteristic precision. This type of control valve is suitable for working conditions with small allowable pressure difference and large pressure difference before and after the valve. It is tightly closed and suitable for regulating medium flow or pressure. This series of products have room temperature type, high temperature type, low temperature type, adjustment cut-off type, bellows seal type and other types.

二、進口電動籠式單座調節閥結構特點： 

1、可調節范圍大，固有可調比為50，流量特性有直線和等百分比。

2、調節切斷型采用軟密封結構閥芯，達VI級泄漏標準(零泄漏)。

3、伺服放大器采用深度動態負反饋，可提高自動調節精度。

4、電動操作器有多種形式，可適用于4~20mA。DC或0~10mA.DC。

5、波紋管密封型調節閥對移動的閥桿形成完全的密封，堵絕流體外漏。

6、電子型電動調節閥可直接由電流信號控制閥門開度，無需伺服放大器 。

1. The adjustable range is large, the inherent adjustable ratio is 50, and the flow characteristics have straight line and equal percentage.

2. The regulating cut-off valve core adopts soft sealing structure, reaching the VI level leakage standard (zero leakage).

3. The servo amplifier adopts deep dynamic negative feedback, which can improve the automatic adjustment accuracy.

4. There are many kinds of electric operators, which can be applied to 4 ~ 20mA. DC or 0 ~ 10 mA.DC 。

5. The bellows seal type control valve forms a complete seal to the moving valve stem and blocks the fluid leakage.

6. The electronic electric control valve can directly control the valve opening by the current signal without servo amplifier.

三、進口電動籠式單座調節閥技術參數及性能：

閥體部分：

閥內部件：