進口電動陶瓷調節閥推薦德國洛克

一、進口電動陶瓷調節閥描述：

德國LOCKE洛克進口電動陶瓷調節閥采用三段式結構，其主要由陶瓷球閥與電子式電動執行機構組合而成，根據不同的現場工況運用不同的鍛件材質（碳鋼或不銹鋼），使閥體材質的結構更加合理。閥門內部材質與介質接觸部分均采用結構陶瓷材料，避免與介質直接接觸，而產生腐蝕的可能。結構陶瓷化學性能穩定，硬度高，可耐絕大部分酸堿介質腐蝕，并且具有極好的耐磨性能。廣泛應用于電廠的煙氣脫硫系統、除渣系統以及燃燒系統；堿廠的鹽水系統、蒸餾系統；造紙廠的紙漿控制系統等。尤其是在電站脫硫（FGD）工程中，陶瓷閥很好地解決了FGD工況存在的高氯離子腐蝕，高固含量磨損兩大問題。在石灰石漿液、石膏漿液廢水的調節過程中德國LOCKE洛克進口陶瓷調節閥是目前最理想的閥門。

Germany locke imported electric ceramic control valve adopts three-stage structure, which is mainly composed of ceramic ball valve and electronic electric actuator. According to different field conditions, different forging materials (carbon steel or stainless steel) are used to make the structure of valve body material more reasonable. The internal material of the valve and the contact part of the medium are made of structural ceramic material, so as to avoid the possibility of direct contact with the medium and produce corrosion. The structural ceramics have stable chemical properties, high hardness, corrosion resistance in most acid and alkali media, and excellent wear resistance. It is widely used in flue gas desulfurization system, slag removal system and combustion system of power plant, brine system and distillation system of alkali plant, pulp control system of paper mill, etc. Especially in the FGD project, the ceramic valve can solve the two problems of high chloride ion corrosion and high solid content wear. In the regulation process of limestone slurry and gypsum slurry wastewater, the ceramic control valve imported from Germany Locke is the most ideal valve at present.

二、進口電動陶瓷調節閥技術參數：

Nominal diameter: DN 15-dn200

Service temperature - 20 ℃～ 300 ℃

Pressure rating: PN1.6MPa ~ pn6.4mpa

Valve body material: WCB, SUS304, SUS316

Ceramic lined alumina / zirconia / silicon carbide

Ball core seat zirconia / silicon nitrat

Stem material: 316 / 316L stainless steel, HC alloy, Monel alloy, structural ceramics

三、進口電動陶瓷調節閥主要特點：

1、重量輕，外型美觀。比傳統的主導產品單座閥、雙座閥、套筒閥輕80%左右；比80年代未出現的日本精小型調節閥還輕45-55%。

2、功能上可替代眾多功能不齊全的產品，使造型簡化，解決了工廠管理復雜、選型復雜、維護工作量大的缺點。

3、本閥的可調比大，一般可達100，并且從開度的10%到90%均可保證良好的調節性。

4、動作平穩，可靠性極高,可解決傳統閥泄漏大的致命結構缺陷。

5、通斷特性優異，漏泄量為零，解決了傳統閥泄漏大的致命結構缺陷。

6、良好的克服壓差能力，防堵功能，流路最簡單，無阻調節，KV值最大，"自潔"性能最好。

7、本調節閥的流量特性為近似等百分比（其理想流量特性與標準等百分比特性對比見下圖）。而實際工作的流量特性，由于總是存在閥前、閥后的壓差，傳統調節閥的實際曲線會發生很大的畸變卻也比較小，因此它不但具有良好的調節性能，而且還具有良好的經濟性和節能性。

8、可根據用戶需求采用電動陶瓷調節閥、氣動陶瓷調節閥

9、可根據實際使用環境，采用襯四氟陶瓷球閥或全襯陶瓷硬密封球閥，以獲得更高的耐腐蝕及耐。

1. Light weight, beautiful appearance. It is about 80% lighter than the traditional leading products of single seat valve, double seat valve and sleeve valve; it is 45-55% lighter than the Japanese fine and small control valve which did not appear in 1980s.

2. In terms of function, it can replace many products with incomplete functions, simplify the modeling, and solve the shortcomings of complex factory management, complex selection and heavy maintenance workload. A kind of

3. The adjustable ratio of the valve is large, generally up to 100, and from 10% to 90% of the opening can ensure good regulation.

4. It has stable operation and high reliability, which can solve the fatal structural defect of traditional valve with large leakage.

5. With excellent on-off characteristics and zero leakage, the fatal structural defect of traditional valve with large leakage is solved.

6. Good ability to overcome pressure difference, anti blocking function, the simplest flow path, no resistance regulation, maximum Kv value, and the best self-cleaning performance.

7. The flow characteristic of the control valve is approximately equal percentage (see the figure below for the comparison between the ideal flow characteristics and the standard equal percentage characteristics). However, due to the pressure difference between the front and back of the valve, the actual curve of the traditional control valve will have a great distortion, but also relatively small, so it not only has good regulation performance, but also has good economy and energy saving.

8. Electric ceramic control valve and pneumatic ceramic control valve can be used according to the needs of users

9. According to the actual use environment, PTFE lined ceramic ball valve or fully lined ceramic hard seal ball valve can be used to obtain higher corrosion resistance and resistance.

四、進口電動陶瓷調節閥性能特點：

進口陶瓷調節閥所有與介質接觸的部分均為結構陶瓷材料 , 其化學穩定性及硬度極高 (洛氏硬度 HRC90),僅次于金剛石。因此,本閥具有極高的耐磨損、耐腐蝕、耐沖蝕性能，且隔熱性好、熱膨脹小。

進口陶瓷調節閥球體采用先進研磨設備及工藝制造,球圓度精度高,表面質量好,與陶瓷閥座對研后,利用Zr02陶瓷的自滑潤性,可取得很好的密封性能，真正達到陶瓷對陶瓷的良好硬密封。

進口陶瓷調節閥徹底改變了金屬硬密封球閥易泄露、扭矩大、密封面不耐腐蝕、不耐磨損的缺點。

進口陶瓷調節閥陶瓷良好的耐磨性,讓本閥經久耐用,可靠性極高. 使用壽命長 ,是鈦合金閥和蒙乃爾閥的2-4倍。

進口陶瓷調節閥用于高硬度的顆粒介質，或有軟顆粒但又有腐蝕的介質中，本閥門具有無可比擬的絕對優勢，也是目前唯一合適此類介質的閥門。

進口陶瓷調節閥可直接接收4-20mA或1-5V的信號，輕松實現閥門的比例調節（位置控制），良好的控制模塊確保了長期穩定的使用。

All parts in contact with the medium of imported ceramic control valve are made of structural ceramic materials, and its chemical stability and hardness are very high (Rockwell hardness hrc90), second only to diamond. Therefore, the valve has very high wear resistance, corrosion resistance, erosion resistance, and good thermal insulation, small thermal expansion.

The imported ceramic regulating valve ball is manufactured by advanced grinding equipment and technology, with high roundness precision and good surface quality. After lapping with the ceramic valve seat and using the self lubrication property of Zr02 ceramics, good sealing performance can be achieved, which can truly achieve the good hard seal between ceramics and ceramics.

Imported ceramic control valve completely changes the metal hard seal ball valve easy to leak, high torque, sealing surface is not resistant to corrosion and wear.

The good wear resistance of the imported ceramic control valve makes the valve durable, highly reliable and has a long service life, which is 2-4 times of that of titanium alloy valve and Monel valve.

The imported ceramic control valve is used in the medium with high hardness, or medium with soft particles but corrosion. This valve has incomparable absolute advantages and is the only valve suitable for such medium at present.

The imported ceramic control valve can directly receive 4-20mA or 1-5V signal, easily realize the proportional adjustment (position control) of the valve, and the good control module ensures the long-term and stable use.