華升-小型紅薯淀粉設備-薯類淀粉設備
價格
訂貨量(臺)
¥3000.00
≥1
店鋪主推品 熱銷潛力款
㠗㠙㠖㠗㠕㠛㠗㠖㠖㠚㠘
在線客服
鞏義市華升機械廠
店齡5年 企業認證
聯系人
武經理 武經理
聯系電話
㠗㠙㠖㠗㠕㠛㠗㠖㠖㠚㠘
經營模式
生產廠家
所在地區
河南省鄭州市
淀粉機性能和技術參數:
1、全封閉機體,無漏水、漏渣、漏漿現象.
2、整機穩定性能好,噪音低。
3、可一次完成渣、漿分離,淀粉純凈,渣內不含渣皮、渣塊、丁狀物。
4、節約耗材,自動進薯、破碎、分離、排漿、排渣。
5、刺輥帶水工作,縮短了渣粉漿空氣中的氧化反應,提高淀粉純白度。
6、漿渣分離度98以上,殘渣含粉率2左右.
Perform ance and technical para meters of starch m achine:
1. Fully enclosed body, no water leakage, slag leakage, slurry leakage
2. The whole m achine has good stability and low noise.
3. It can complete the separation of slag and pulp at one time, the starch is pure, and there is no slag skin, slag block and sm all substance in the slag.
4. Saving consum ables, aut o m atic feeding, crushing, separation, slurry discharge, slag discharge.
5. The air oxidation reaction of slag slurry was shortened and the whiteness of starch was improved.
6. The separation degree of pulp and slag is above 98 and the powder content of residue is about 2
新型紅薯淀粉粉碎分離機,以特鋼齒條代替以往陳舊的手工沖刺方法,讓一些沒有沖刺技術的地方也能輕松使用,使生產效率大幅度提升。
高耐磨、刺齒鋒利,加工出的粉渣均勻細膩,淀粉提取率更高。更換齒條方便快捷,大大減少了人工的勞動強度和作業成本,生產效率大幅度提高。分離部分采用無框架型三截分離結構,阻力小,更節能。
The new type of sweet potato starch crushing separator uses special steel rack instead of the old m anual sprint method, which m akes it easy to use in some places without sprint technology, and greatly improves the production efficiency.
It has high wear resistance, sharp teeth, even and fine powder residue and higher starch extraction rate. It is convenient and quick to replace the rack, which greatly reduces the labor intensity and operation cost, and greatly improves the production efficiency. The separation part adopts fra meless three section separation structure, which has less resistance and more energy saving.
淀粉機工作原理:
淀粉原料被送入喂料口后,在刺輥作用下被粉碎成絲狀,并被帶進錐磨座。在螺旋軸的推動下,被擠進由錐磨內外殼形成的狹小縫隙中,在錐磨內殼的轉動作用下物料進一步被擠壓、粉碎、研磨,從而使淀粉從纖維上游離出來。被研磨后的物料擠進分離筒后在攪拌軸的作用下與水充分混合,其中游離的淀粉溶入水中,通過分離篩流出并被收集待用,剩余的渣滓在攪拌軸的推進下,被推出分離筒外。