排水井篦子模具的生產過程是需要將模具運到加工廠進行預制，而且也要將水泥和砂石等原料運到工廠來進行攪拌，我們使用的混凝土規格大多都是比較好的，其強度非常的好。將混凝土材料按照一定的比例進行混合，從而使其能夠充分的混合到一起，在工程中的使用作用也是比較好的。在使用  排水井篦子模具預制生產之前，如果混凝土已經發生凝結的話是不能使用的。  道路暗溝卵形槽模具   日式卵形集水槽模具在生產完混凝土制塊之后，要將預制塊運輸?shù)绞┕?chǎng)所，然后將其搬運到指定的位置進行安裝，安放的時候要做到穩固，而且砌塊之間的砂漿要足夠飽滿，才能夠緊密的粘結在一起，要讓其整體的縫隙是比較小的。 排水井篦子模具當生產完成以后要放到庫房里面來保存，而庫房要有專門的人來進行管理，主要是要定期監測庫房里面的溫度和濕度，而且里面的空間要足夠大，并且經常對模具來進行保養工作，保護鋼模具的質量，保證  排水井篦子模具下一次的預制效果不會受到影響了才能脫模，既可以保證預制塊質量，也能延長模具的使用時間。The production process of drain well grate mold needs to transport the mold to the processing plant for prefabrication, and also transport raw materials such as cement and gravel to the plant for mixing. Most of the concrete specifications we use are relatively good and their strength is very good. Concrete materials are mixed according to a certain proportion, so that they can be fully mixed together, which plays a better role in engineering. Before the use of drainage well grate mold prefabrication production, if the concrete has set, it can not be used. After the production of concrete block, the prefabricated block shall be transported to the construction site, and then transported to the designated position for installation. When placing, it shall be stable, and the mortar between the blocks shall be full enough to be closely bonded together, so that the overall gap is relatively small. After the completion of production, the drain well grate mold shall be stored in the warehouse, and the warehouse shall be managed by special personnel, mainly to regularly monitor the temperature and humidity in the warehouse, and the space inside shall be large enough, and the mold shall be maintained frequently to protect the quality of steel mold, Ensure that the next prefabrication effect of the drainage well grate mold will not be affected before demoulding, which can not only ensure the quality of the prefabricated block, but also prolong the service time of the mold