一般化工泵怎么操作

1.泵起動前應將泵內灌滿加足輸送的液體，嚴禁無液起動。

5.介質中如含有固體顆粒時，應在泵入口處加過濾器。

化工泵按使用條件分類

化工泵按使用條件分類：
(1)大流量及微流量泵：流量分別為300m3/min及0.O1L/min；
(2)高溫泵及低溫泵：高溫達500℃，低溫至一Z53℃；
(3)高壓泵及低壓泵：高壓達200MPa，真空度為2.66---10.66kPa(20—80mmHg)；
(4)高速泵及低速泵：高速達24000r/min，低速5—10r/min；機械密封又叫端面密封，在國家有關標準中是這樣定義的：“由至少一對垂直于旋轉軸線的端面在流體壓力和補償機構彈力（或磁力）的作用以及輔助密封的配合下保持貼合并相對滑動而構成的防止流體泄漏的裝置。
(5)精1確的計量泵：流量的計量精度達±0.3%；
(6)高粘度泵：粘度達數千帕秒（Pa·s）。

譯文：

 

Chemical pump according to the conditions of use classification:
(1) high flow and micro-flow pump: Flow were 300m3 / min and 0.O1L / min;
(2) high temperature pumps and cryogenic pumps: High temperature up to 500 ℃, low temperature to a Z53 ℃;
(3) high-pressure pump and pressure pump: High pressure up to 200MPa, vacuum degree of 2.66 --- 10.66kPa (20-80mmHg);
(4) high-speed pumps and low-speed pump: High speed up 24000r / min, low speed 5-10r / min;
(5) the precise metering pump: flow measurement accuracy of ± 0.3%;
(6) high viscosity pump: thousands of Pa s viscosity (Pa · s).

化工泵按輸送介質的分類

化工泵按輸送介質的分類：
1）水泵：包括清水泵、鍋爐給水泵、凝水泵、熱水泵。
2）耐腐蝕泵：包括不銹鋼泵、高硅鑄鐵泵、陶瓷耐酸泵、不透性石墨泵、襯硬膠泵、硬聚氯1乙烯泵、屏蔽泵、隔膜泵、鈦泵等。
3）雜質泵：包括漿液泵、砂泵、污水泵、煤粉泵、灰渣泵等。
4）油泵：冷油泵、熱油泵、油漿泵、液態烴泵等。像DFL(W)H化工泵、DFL(W)PH屏蔽化工泵(超過90℃時屏蔽電機的防護等級應采用H級)。

譯文：
The basic properties of the chemical pump condition：
1) water pump: including the fresh water pump, boiler feed pump, condensate pump, hot water pump.
2) corrosion resistant pump, including stainless steel pump, high silicon cast iron pump, ceramic acid pump, not permeability graphite pump, hard rubber, hard polyvinyl chloride (PVC) pump, shield pump, diaphragm pump, titanium pump, etc.
3) impurity pump: including pulverized coal slurry pump, sand pump, sewage pump, pump, ash pump, etc.
4) the oil pump, oil pump cold, heat pump, slurry pump, liquid hydrocarbon pump, etc.
化工泵按輸送介質的分類。