預制砼扭王字塊模具   預制扭王字塊模具   宏旭制作說明

為什么設計成這種構造呢？因為這種構造的海岸扭工字塊鋼模具   海岸扭王字塊模具可以透水，這樣潮漲潮落的都可以有效的緩解海水的沖擊，對于預制塊的長久使用有一定的好處。生產防浪石的模具一般都是鋼模板，因為體積大，造型獨特，塑料模具無法完成胎具的生產，所以使用鋼模板生產的非常多。海岸扭工字塊鋼模具   海岸扭王字塊模具的使用在沿海地區非常普遍，內地因為不需要這種預制塊，所以不使用這種模具。扭工字塊預制塊是用在海岸外圍一圈的，內部采用扭工字塊的結構，這樣層層減緩海浪的沖擊力，保護沿岸護堤設施等，一般海岸扭工字塊鋼模具   海岸扭王字塊模具設計樣式都是由專業的圖紙設計要求的，扭工字塊的 在中間部位，采取四角形的結構或者中間小上下大的結構，在預制塊擺放的時候有兩種形式，一種是規格擺放，另一種是不規則的擺放，一般都是選擇后者，施工起來比較方便，而且對于海浪在后面的沖擊力更小一些。使用海岸扭工字塊鋼模具   海岸扭王字塊模具之前將模具的整體刷上油或者是只給扭工字塊鋼模具的內里刷上脫模劑，都是方便之后的脫模工序節省時間，刷油也是防止模具與水泥直接的接觸，以此來延長海岸扭工字塊鋼模具   海岸扭王字塊模具的使用年限。脫模完成后將整套模具的里面仔細清理干凈，凝固的水泥及時清理出去，然后為鋼模具進行防銹處理，放在一個干燥并通風的地方，為整套模具蓋上防水布就可以了。

Why is this structure designed? Because of this structure of coastal I-shaped block steel mold, coastal Accropode mold can be permeable, so that the tide can effectively alleviate the impact of sea water, for the long-term use of prefabricated block has a certain advantage. The mould used to produce the anti wave stone is generally steel formwork. Because of its large volume and unique shape, plastic mould can not complete the production of mould, so steel formwork is used in many cases. Coastal I-block steel mold coastal Accropode mold is very common in coastal areas, because the mainland does not need this kind of prefabricated block, so it is not used. The prefabrication block of I-shaped block is used in the periphery of the coast, and the internal structure is used to slow down the impact force of the sea wave layer by layer, protect the coastal dike protection facilities, etc. generally, the design style of the coastal Accropode mold is required by the professional drawing design In the middle part, the quadrangular structure or the middle small upper and lower large structure is adopted. When placing precast blocks, there are two forms, one is specification placement, the other is irregular placement. Generally, the latter is selected. The construction is more convenient, and the impact force of the wave behind is smaller. Before using the coastal I-block steel mold, it is convenient to brush the whole mold with oil or just brush the inner part of the mold with release agent before using the coastal torsional I-block steel mold. It is convenient for the subsequent demoulding process to save time. The oil painting also prevents the mold from contacting with the cement directly, so as to extend the service life of the coastal Accropode steel mold. After demoulding, the inside of the whole set of mould shall be carefully cleaned, the solidified cement shall be cleaned out in time, and then the steel mould shall be antirust treated and placed in a dry and ventilated place, and the waterproof cloth shall be covered for the whole set of mould.