海邊扭王字塊模具   混凝土扭王字塊模具   宏旭制作說明

對于沿海和近海地區(qū)，預制扭王字塊模具  扭王字塊鋼模具可以利用大陸上的砂、石和淡水等原材料預制后擺放在海岸周圍進行海堤海岸防護。然而，對于遠海和深海中的海島建設，目前面臨著原材料長距離運輸、淡水和河砂缺乏難題。我國南海上的島嶼離岸距離最遠超過1500km，東海上的島嶼離岸距離最遠約為530km，如果從陸地上運送淡水、河砂等材料，或者在建設點進行海水淡化、海砂和粗骨料的無氯化處理，將耗費大量成本?，F(xiàn)有的預制扭王字塊模具  扭王字塊鋼模具的制作通常都是采用機械配合人工，目前的用于扭王字塊制造的模具在安裝和拆卸過程中費時費力，不利于降低人工成本。預制扭王字塊模具  扭王字塊鋼模具包括內部腔體構成扭王字塊結構的殼體和位于殼體上的輔助機構；殼體由底座殼、位于底座上的主體殼和位于主體殼上的頂座殼組成；殼體形成的腔體由下至上形成 桿件部、 桿件部和第三桿件部，底座殼與主體殼的下部所形成的腔體構成 桿件部，頂座殼和主體殼的上部形成的腔體構成第三桿件部，主體殼中部形成的腔體構成 桿件部；底座殼和主體殼均由對稱的兩部分組成；輔助機構包括支撐機構和拆卸機構。扭王塊的大小進行模具生產的，預制扭王字塊模具  扭王字塊鋼模具在保存之前，要進行徹底的清洗，這樣下一次在拿出來使用的時候，才不會影響使用。

For coastal and offshore areas, prefabricated Accropode steel mold can be used for coastal protection by using raw materials such as sand, stone and fresh water from the mainland. However, for the offshore and deep-sea island construction, there are many problems, such as long-distance transportation of raw materials, lack of fresh water and river sand. The offshore distance of islands in the South China Sea is more than 1500 km, and that in the East Sea is about 530 km. If fresh water and river sand are transported from land, or desalination, non chlorination treatment of sea sand and coarse aggregate at construction sites will cost a lot of money. The existing prefabricated Accropode mold is usually made by mechanical cooperation with labor. The current mold for manufacturing Accropode is time-consuming and laborious in the process of installation and disassembly, which is not conducive to reducing the labor cost. Prefabricated Accropode die the steel die of the Accropode consists of a shell with an internal cavity and an auxiliary mechanism on the shell; the shell is composed of a base shell, a main shell on the base and a top seat shell on the main shell; the cavity formed by the shell forms a member part from bottom to top The cavity formed by the base shell and the upper part of the main shell constitutes the third rod part, the cavity formed in the middle of the main shell constitutes the rod part; the base shell and the main shell are composed of two symmetrical parts; the auxiliary mechanism includes the supporting mechanism and the disassembly mechanism. If the size of the Accropode is used for mold production, the prefabrication of the Accropode mold and the steel mold of the Accropode should be thoroughly cleaned before being stored, so that the next time it is taken out for use, it will not affect the use.