其他定制尺寸，請聯系客服

高速防撞墻塑料模具在加工的時候一定要注意好對于模具的保護，因為是需要長時間接觸到模具的，如果出現任何情況，或者是說大量泥漿粘連在模具表面的話，就會加重模具的磨損問題。每個模具都是有著規定的使用年限，磨損情況過重的話就會造成使用時間受到影響，也會讓影響到防撞墻的成型，所以每次使用的時候都是要按照規定的方式進行制作才可以。而對于高速防撞墻塑料模具的養護，在使用的時候一定要按照規定的方式進行，首先在組裝模具的時候要用到螺栓進行加固的處理，而且進行模具的拼接是否嚴密的問題，只有這樣才可以讓模具有著更好的加工效果。之后將機油或者是脫模劑仔細的在模具與泥漿接觸的部位進行涂刷，這樣是為了隔絕開泥漿與模具的就接觸，自然也是為了讓模具在澆筑完泥漿后不會有泥漿直接粘連在模具上的情況。在泥漿凝固后將整個高速防撞墻塑料模具拆開，并且為模具進行清理，之后用到清水沖洗干凈擦干后涂刷上保護劑才可以讓模具有著更好的存放效果。When processing the high-speed anti-collision wall plastic mold, we must pay attention to the protection of the mold, because it needs to contact the mold for a long time. If any situation occurs, or a large amount of mud adheres to the mold surface, it will aggravate the wear problem of the mold. Each mold has a specified service life. If the wear is too heavy, the service time will be affected and the forming of the anti-collision wall will be affected. Therefore, each time it is used, it should be made in accordance with the specified way. For the maintenance of high-speed anti-collision wall plastic mold, it must be carried out in accordance with the specified way. Firstly, bolts should be used for reinforcement when assembling the mold, and whether the splicing of the mold is tight or not. Only in this way can the mold have better processing effect. After that, the engine oil or release agent shall be carefully painted on the part where the mold is in contact with the mud, so as to isolate the contact between the mud and the mold. Naturally, it is also to prevent the mold from directly adhering to the mold after pouring the mud. After the slurry solidifies, the whole plastic mold of the high-speed anti-collision wall is disassembled and cleaned for the mold. After that, it is washed with clean water, wiped dry and coated with protective agent, so that the mold can have a better storage effect.