宏旭定制  現場澆筑防撞墻模具   防撞墻鋼模板

  現場澆筑防撞墻模具   防撞墻鋼模板他的作用還是挺好的。稍微不好的小環節，也是會隨著震動很自然化解掉的，既然是改過的模具，在生產上我們也是很節省時間的。那么在外觀上就不可能像之前那么注重了，只要模具好用就行，其實外觀不是最主要的。這也是很客記提出來的要求。我們也會廣大的客戶征求更多的意見，這樣就會有益我們的改進、只能不停的提升細節設計才會使這個防撞墻模具讓更多的人了解。所以在與其它模具廠進行對比時我們是有很大的。當然，  現場澆筑防撞墻模具   防撞墻鋼模板還是主要用于高速公路，鐵路上用的據多。

   現場澆筑防撞墻模具   防撞墻鋼模板， 我們?cè)谥亓糠矫嬉矞p輕了不少?；旧系膯?wèn)題已經解決了。我們將會在中鐵十六局上進行驗證，結果顯示我們的驗證已經得到了肯定。在2016年的時候中鐵十六局已經使用了我廠生產的防撞墻模具。效果是相當 的當錯的。在中鐵十六局施工現場當中得到了肯定。我們?cè)趧e的防撞墻模具上也會同樣如此，除了之上的模具之外我們不會對其他的鋼模具都進行很大程度的改變 。

Cast in situ anti-collision wall mold, anti-collision wall steel formwork, his role is still very good. A little bad small links will be naturally dissolved with the vibration. Since it is a modified mold, we also save time in production. So it is impossible to pay attention to the appearance as before, as long as the mold is easy to use, in fact, the appearance is not the most important. This is also a very guest request. We will also ask the majority of customers for more opinions, which will be beneficial to our improvement. Only by constantly improving the detailed design can we make the anti-collision wall mold known to more people. So in comparison with other mold factories, we have a large. Of course, the cast-in-situ anti-collision wall steel formwork is mainly used for expressways and railways.We have also reduced the weight of the anti-collision wall steel formwork cast on site. The basic problem has been solved. We will carry out verification in the 16th Bureau of China Railway, and the results show that our verification has been confirmed. In 2016, China Railway 16th Bureau has used the anti-collision wall mold produced by our factory. The effect is quite wrong. It has been affirmed in the construction site of the 16th Bureau of China Railway. We will do the same with other anti-collision wall molds. We will not make any great changes to other steel molds except the mold above.