宏旭定制   澆筑防撞墻模具    防撞墻塑料模具

澆筑防撞墻模具    防撞墻塑料模具當預埋件與護欄鋼筋出現沖突時，適當移動鋼筋位置，保證預埋件位置準確，清掃預制構件表面，并用水沖洗干凈，澆筑防撞墻模具    防撞墻塑料模具鑿毛上根據測量確定的防護欄邊線，采用人工對護欄邊線范圍內的箱梁表面進行鑿毛處理，鑿除混凝土表面的水泥砂漿和松弱層，并用水沖洗干凈，澆筑防撞墻模具    防撞墻塑料模具鋼筋的加工及安裝主線邊防撞護和匝道防撞護欄順橋向每2m設置一道假縫，嚴格按照設計圖紙對上述預埋件進行埋設，預埋件安裝要做到不遺漏，定位準確。設計伸縮縫處鋼筋要斷開，斷面要整齊。清掃預制構件表面，并用水沖洗干凈。模具生產過程中的細節會影響模具的使用和性能，對模具使用后保養方式要注重，保證模具的使用次數。Pouring the anti-collision wall mold anti-collision wall plastic mold when the embedded parts conflict with the guardrail reinforcement, properly move the position of the reinforcement to ensure the accurate position of the embedded parts, clean the surface of the prefabricated components, and wash them with water, and then pour the anti-collision wall mold On the plastic mould of the anti-collision wall, according to the side line of the protective fence determined by measurement, the surface of the box girder within the boundary line of the guardrail shall be roughened manually, and the cement mortar and loose layer on the concrete surface shall be chiseled off, and the water shall be used to clean the mold of the anti-collision wall Processing and installation of plastic mould reinforcement for anti-collision wall, a false joint is set every 2m along the bridge direction for the main line side anti-collision protection and ramp anti-collision guardrail. The above embedded parts shall be embedded in strict accordance with the design drawings, and the installation of embedded parts shall be done without omission and accurate positioning. The reinforcement at the design expansion joint shall be disconnected and the section shall be neat. Clean the surface of prefabricated components and wash them with water. The details in the process of mold production will affect the use and performance of the mold. Attention should be paid to the maintenance method of the mold after use to ensure the use times of the mold..