樂豐定制 圓柱模具 圓柱鋼模具 按圖紙要求生產

圓柱鋼模具加工出來的預制件可以用來幫助橋梁進行搭建，或者是其他的建筑物施工也可以進行使用，而且圓柱預制件的尺寸可以隨著工程的要求來進行改動，直徑尺寸可以調整自然也就可以擴大圓柱預制件的使用范圍了。在使用是需要將整個圓柱鋼模具先來進行拼接，鋼模具是非常結實的，不容易出現彎折的問題，所以在組裝的時候一定要先使用卡口將模具固定在一起，然后將接口對齊不能夠有偏差的問題，之后才可以使用螺栓進行固定，這樣整個模具就不會有漏漿的問題。內腔中也要涂刷上規定的脫模劑，這樣才可以放心進行泥漿的澆筑，而混凝土加工出來的圓柱預制件會更為的堅硬，自然也會更為的結實，在施工時會更加便利一些。在進行預制件制作的時候要注意好對于模具的保護，而脫模完成后的模具也要使用清潔劑來做清理，不可以讓泥漿長時間粘連在模具的上面，避免讓圓柱鋼模具過早的出現老化的問題，自然存放模具的倉庫也要做好干燥處理才可以。

The prefabricated parts processed by cylindrical steel mold can be used to help bridge construction, or other building construction can also be used. Moreover, the size of the cylindrical prefabricated parts can be changed according to the requirements of the project, and the diameter size can be adjusted naturally to expand the scope of use of the cylindrical prefabricated parts. In use, the whole cylindrical steel mold needs to be spliced first. The steel mold is very solid and not prone to bending. Therefore, when assembling, it is necessary to fix the mold with bayonet first, and then align the interface without deviation, and then fix it with bolt, so that the whole mold will not have leakage. The inner cavity shall also be coated with the specified release agent, so that the slurry pouring can be assured, and the column prefabricated parts processed by the concrete will be harder, naturally stronger, and more convenient during the construction. When making prefabricated parts, we should pay attention to the protection of the mold, and the mold after demoulding should also be cleaned with cleaning agent. It is not allowed to let the mud stick on the mold for a long time, so as to avoid premature aging of the cylindrical steel mold. The warehouse where the mold is naturally stored should also be dried.

圓柱鋼模板在脫模完成后是需要進行檢查的，因為一些錯誤的操作，或者是沒有按照使用方式進行加工，有可能會造成鋼模板老化的情況，而鋼模板的持續使用時間一般都是在兩三年，那么在制作時模具過早出現老化的問題，就會影響到整個的鋼模板不能夠再正常進行使用，頻繁的更換也會增加模板的更換率，那么模具在使用完成后就需要注意好模具的保護。需要先將整個圓柱鋼模板拆開，然后檢查模具的內部有沒有出現生銹和變形的問題，接著先將模具表面的浮土清理干凈，可以使用抹布進行擦拭，如果出現了泥漿粘連嚴重的情況，就可以將清潔劑在泥漿粘連的地方進行涂刷，等待兩三分鐘后就可以使用鏟子將泥漿清楚，并且來使用刷子為模具進行清理這樣就可以了。清潔干凈的模具也要選擇一處穩定的倉庫進行存放，鋼模具如果是在潮濕的環境進行存放或者是使用的話，就會加重圓柱鋼模板生銹的問題，造成模具使用時間的減短，自然生產效果也就達不到標準。

It is necessary to check the cylindrical steel formwork after demoulding, because some wrong operations, or not processed in accordance with the use mode, may cause the aging of the steel formwork, and the continuous use time of the steel formwork is generally two or three years, so the premature aging of the mold during manufacturing will affect the whole steel formwork can no longer be normal In use, frequent replacement will also increase the replacement rate of the template, so the mold needs to pay attention to the protection of the mold after use. The whole cylindrical steel formwork needs to be disassembled first, and then check whether there is any rust and deformation inside the mold. Then clean the floating soil on the surface of the mold first, and wipe it with a rag. If there is serious mud adhesion, the detergent can be brushed at the place where the mud adheres. Wait two or three minutes, and then use a shovel to mud Clear, and use a brush to clean the mold so it's OK. Clean molds also need to be stored in a stable warehouse. If steel molds are stored or used in a humid environment, it will aggravate the problem of cylindrical steel formwork rust, resulting in the reduction of mold use time, and the natural production effect will not reach the standard.