上海富覽進出口貿易有限公司
店齡5年 · 企業認證 · 上海市奉賢區
手機掃碼查看 移動端的落地頁
上海富覽進出口貿易有限公司
主營產品: 進口蝶閥, 進口調節閥, 進口疏水閥, 進口電磁閥, 進口減壓閥, 進口離心泵, 進口流量計, 進口化工泵, 進口電磁流量計, 進口磁力泵, 進口隔膜閥, 進口多級泵, 進口閘閥, 進口截止閥, 進口過濾器, 進口高溫泵, 進口排污泵, 進口真空泵, 進口安全閥, 進口管道泵, 進口衛生泵, 進口計量泵, 進口隔膜泵, 進口刀閘閥, 進口角座閥, 進口止回閥, 進口球閥, 進口針型閥, 進口真空閥門, 進口衛生級閥門, 進口低溫閥門, 進口水力控制閥, 進口乳化泵, 進口屏蔽泵, 進口消防泵, 進口渦街流量計, 進口渦輪流量計, 進口金屬轉子流量計
進口燃?xì)庵够亻y德國洛克品牌精工細作
價格
訂貨量(臺)
¥1180.00
≥1
店鋪主推品 熱銷潛力款
㠗㠙㠚㠗㠛㠘㠘㠘㠘㠕㠒
在線客服
上海富覽進出口貿易有限公司
店齡5年 企業認證
聯系人
黃盛杰 經理
聯系電話
㠗㠙㠚㠗㠛㠘㠘㠘㠘㠕㠒
經營模式
經營批發
所在地區
上海市奉賢區
主營產品
進口蝶閥, 進口調節閥, 進口疏水閥, 進口電磁閥, 進口減壓閥, 進口離心泵, 進口流量計, 進口化工泵, 進口電磁流量計, 進口磁力泵, 進口隔膜閥, 進口多級泵, 進口閘閥, 進口截止閥, 進口過濾器, 進口高溫泵, 進口排污泵, 進口真空泵, 進口安全閥, 進口管道泵, 進口衛生泵, 進口計量泵, 進口隔膜泵, 進口刀閘閥, 進口角座閥, 進口止回閥, 進口球閥, 進口針型閥, 進口真空閥門, 進口衛生級閥門, 進口低溫閥門, 進口水力控制閥, 進口乳化泵, 進口屏蔽泵, 進口消防泵, 進口渦街流量計, 進口渦輪流量計, 進口金屬轉子流量計
進口燃?xì)庵够亻y
產品名稱 | 進口燃?xì)庵够亻y | 產品型號 | LOCKE |
產品品牌 | 德國《LOCKE》洛克 | 產品包裝 | 木箱 |
驅動方式 | 自力式 | 公稱通徑 | DN15~DN500 |
連接方式 | 螺紋、法蘭、焊接、對夾 | 公稱壓力 | PN1.6-32.0Mpa |
結構形式 | 旋啟式、升降式、直通式 | 適用溫度 | -20℃~180℃ |
閥體材質 | 鑄鋼、不銹鋼、合金鋼 | 制造標準 | 德國洛克原廠標準 |
適用介質 | 氣體、燃?xì)狻⒁夯瘹?、?/span> | ||
應用場合 | 電站、冶金、建筑、鍋爐、設備、管道、熱能、空調、消防、給排水、水處理、石油化工、造紙印刷廠。 | ||
產品報價 | 面議,電議(歡迎來電咨詢 400-8828-037 021-51870285) | ||
產品產地 | 德國 | ||
生產廠家 | 德國洛克閥門國際集團 | ||
指定代理 | 上海富覽進出口貿易限公司(中國總代理商及上海辦事處) |
一、進口燃?xì)庵够亻y特點:
1.結構合理:閥座設計成與水平成一定角度使閥瓣在沒有外力作用時也能保持與閥座貼合減少了閥瓣來回擺動與敲擊;設置重避免了介質壓力較大時產生的重?fù)?;減輕閥瓣重量避免在較低壓波動時產生快速重?fù)糸y座現象。
2.密封性能:采用了聚四氟乙烯為密封面的材料,利用聚四氟乙烯在介質壓力作用下產生的微量變形提高了密封性能,同時在閥瓣重?fù)魰r可以吸收一部分能量減緩重?fù)舯Wo(hù)閥門及管。
3.減小閥門流阻:閥瓣的減輕及重錘的設置可使得在介質壓力極低的狀態下閥瓣也能全部開啟并把閥瓣穩定在全開的位置上減少流阻節約能耗。
4.閥瓣位置調整:在搖桿與閥瓣上下面相關位置設置調整螺栓保證了閥瓣與閥座貼合提高密封性能并限定了閥瓣的自由晃動避免了噪聲及閥瓣等零件的損壞。
1. Reasonable structure: the valve seat is designed to be at a certain angle with the horizontal so that the valve disc can keep fit with the valve seat when there is no external force; the back and forth swing and knocking of the valve disc are reduced; the setting weight avoids the heavy impact when the medium pressure is large; the weight of the valve disc is reduced to avoid the rapid heavy impact on the valve seat when the low pressure fluctuates.
2. Sealing performance: polytetrafluoroethylene is used as the sealing surface material, and the tiny deformation of polytetrafluoroethylene under the medium pressure is used to improve the sealing performance. At the same time, part of energy can be absorbed to slow down the impact and protect the valve and pipe when the valve clack is pounded.
3. Reduce the flow resistance of the valve: the reduction of the valve disc and the setting of the heavy hammer can make the valve disc fully open under the condition of extremely low medium pressure and stabilize the valve disc at the fully open position to reduce the flow resistance and save energy.
4. Disc position adjustment: set adjustment bolts on the upper and lower parts of the rocker and disc to ensure that the disc fits the valve seat to improve the sealing performance and limit the free shaking of the disc to avoid noise and damage of the disc and other parts.
二、進口燃?xì)庵够亻y描述:
德國LOCKE洛克進口燃?xì)庵够亻y其作用是防止天燃?xì)?、液化石油氣管路中的介質倒流。啟閉件靠介質流動和力量自行開啟或關閉,采用了聚四氟乙烯為密封面的材料,利用聚四氟乙烯在介質壓力作用下產生的微量變形,提高了密封性能,減緩介質壓力的沖擊,防止靜電而產生了火花,保護閥門及管道,適用燃?xì)夤艿揽刂平油ê筒脭喙苈方橘|(zhì)的啟閉裝置,阻止介質逆流。
The function of Locke lock gas check valve imported from Germany is to prevent the backflow of medium in the gas pipeline of natural gas and liquefied petroleum. The opening and closing parts are opened or closed by the flow and force of the medium. Polytetrafluoroethylene is used as the sealing surface material. The tiny deformation of polytetrafluoroethylene under the medium pressure is used to improve the sealing performance, slow down the impact of the medium pressure, prevent the fire caused by static electricity, protect the valve and pipeline, and apply to the opening and closing installation of gas pipeline to control the connection and cutting of pipeline medium Set to prevent reverse flow of media.
三、進口燃?xì)庵够亻y技術參數:
1、規格范圍:DN15-DN500
2、壓力范圍:PN16-PN320
3、溫度范圍:-20℃~180℃
4、閥體材質:WCB、SS304
5、閥桿材質:SS304
6、閥蓋材質:WCB、SS304
7、閥座材質:尼龍、聚四氟乙烯
8、連接方式:法蘭、內螺紋,焊接
9、適用范圍:氣體、燃?xì)?、液化氣、?/font>
1. Specification range: dn15-dn500
2. Pressure range: pn16-pn320
3. Temperature range: - 20 ℃ ~ 180 ℃
4. Valve body material: WCB, SS304
5. Stem material: SS304
6. Valve cover material: WCB, SS304
7. Valve seat material: nylon, polytetrafluoroethylene
8. Connection method: flange, internal thread, welding
9. Scope of application: gas, gas, liquefied gas, water