德國洛克進口氮氣減壓閥品牌

一、進口氮氣減壓閥結構優點：

1.減壓的效果可靠，出口壓力不受進口壓力及流量的影響，既減動壓，又減靜壓，能夠保持設定的出口壓力恒定.

2.調節操作方便，只需調節先導閥的調節螺釘，就能獲得精確穩定的出口壓力.

3.節能效果好，閥體采用了全通道流線型直流式設計，壓力損失小，流量大且體積小，重量輕.

4.壽命長，重要零件均采用特殊材料，基本無須維護.

1. The pressure reducing effect is reliable. The outlet pressure is not affected by the inlet pressure and flow. It can reduce both the pressure and the static pressure, and keep the set outlet pressure constant

2. It is convenient to adjust and operate. Only adjusting the adjusting screw of the pilot valve can obtain accurate and stable outlet pressure

3. Good energy saving effect. The valve body adopts the full channel streamline DC design, with small pressure loss, large flow, small volume and light weight

4. Long service life, important parts are made of special materials, basically maintenance free

二、進口氮氣減壓閥描述：

德國LOCKE洛克是國際上著名的流體設備生產企業，生產的進口氮氣減壓閥是先導活塞式減壓閥具有調壓、穩壓動作平穩。由主閥和導閥兩部分組成。主閥主要由閥座、主閥盤、活塞、彈簧等零件組成。導閥主要由閥座、閥瓣、膜片、彈簧、調節彈簧等零件組成。通過調節調節彈簧壓力設定出口壓力、利用膜片傳感出口壓力變化，通過導閥啟閉驅動活塞調節主閥節流部位過流面積的大小，實現減壓穩壓功能。

本產品主要用于氣體管路，如空氣、氮氣、氧氣、氫氣、液化氣、天然氣等氣。

Locke lock is a famous international manufacturer of fluid equipment. The imported nitrogen pressure reducing valve is a pilot piston type pressure reducing valve with stable pressure regulation and stable operation. It is composed of main valve and pilot valve. The main valve is mainly composed of valve seat, main valve disc, piston, spring and other parts. The pilot valve is mainly composed of valve seat, disc, diaphragm, spring, regulating spring and other parts. Through adjusting and adjusting the spring pressure to set the outlet pressure, using the diaphragm to sense the outlet pressure change, and through the pilot valve to open and close the driving piston to adjust the size of the flow area of the throttle part of the main valve, the pressure reducing and stabilizing function is realized.

This product is mainly used for gas pipeline, such as air, nitrogen, oxygen, hydrogen, liquefied gas, natural gas, etc.

三、進口氮氣減壓閥選型：

1、根據使用工況確定減壓閥的類型和調壓精度。

2、根據所需最大輸出流量選擇合適的通徑。

3、根據使用工況需要確定進口壓力和出口壓力。

4、根據使用介質是否有腐蝕性、毒性等確定閥體材質。

5、根據工況需求選擇合適的連接方式。

根據使用工況選擇正確的溫度。

1. Determine the type of pressure reducing valve and pressure regulating accuracy according to the operating conditions.

2. Select the appropriate path according to the maximum output flow required.

3. The inlet pressure and outlet pressure shall be determined according to the operation conditions.

4. The valve body material shall be determined according to whether the medium used is corrosive or toxic.

5. Select the appropriate connection mode according to the working conditions.

Choose the right temperature according to the working condition.

四、進口氮氣減壓閥技術參數：

1、口徑：DN10-DN500

2、壓力：1Kp-50Mpa

3、溫度：-40℃ ~550℃

4、材質：鑄鐵，黃銅，鑄鋼，不銹鋼

5、適用介質：氮氣

1. Diameter: dn10-dn500

2. Pressure: 1kp-50mpa

3. Temperature: - 40 ℃ ~ 550 ℃

4. Material: cast iron, brass, cast steel, stainless steel

5. Applicable medium: nitrogen