宏旭定制  生態擋墻護坡磚模具  生態擋土墻模具

生態擋墻護坡磚模具  生態擋土墻模具是一種結構非常復雜的鋼結構，雖然該模具在操作起來非常簡單，但是大部分客戶都是選擇將該模具轉移到預制工廠進行生產，因?yàn)檫@樣更能發揮出生態擋墻護坡磚模具  生態擋土墻模具的價值，在預制工廠生產出來的預制塊質量是非常有保障的，能夠符合工程上的要求，從而進行順利施工，提高了工程的施工效率，降低了工人的施工難度，那么生態擋墻護坡磚模具  生態擋土墻模具在進行生產時需要注意哪些事情呢？首先在使用前要先將模具清理干凈，這樣在進行后續的刷油處理中才會起到脫模劑應有的效果，如果表面灰塵很多，脫模劑和灰塵混合后會形成油污，影響后續的脫模效果，再將模具組裝完成后可以倒入適量的水，用來檢測模具的嚴密性，一切準備緒后可以進行灌漿工作了，然后將震動棒插入泥漿震動一段時間后可以將其進行晾置等待凝固了，在進行拆卸時將模塊上的螺絲卸下來，注意對模具進行拆卸時不要用硬物對其進行敲擊，以免影響預制塊的質量。The mold of ecological retaining wall slope protection brick is a kind of steel structure with very complex structure. Although the mold is very simple to operate, most customers choose to transfer the mold to the prefabrication factory for production, because it can give full play to the mold of ecological retaining wall slope protection brick The value of the ecological retaining wall mold, the quality of the prefabricated block produced in the prefabrication factory is very guaranteed, which can meet the requirements of the project, so as to carry out the smooth construction, improve the construction efficiency of the project, and reduce the construction difficulty of the workers. Then what things should be paid attention to when the ecological retaining wall mold is produced? First of all, the mold should be cleaned before use, so that the effect of release agent can be achieved in the follow-up oil painting treatment. If there is a lot of dust on the surface, the oil stain will be formed after the mixture of release agent and dust, which will affect the subsequent demoulding effect. After the mold is assembled, appropriate amount of water can be poured to detect the tightness of the mold. After all preparations, the mold can be poured When the slurry is working, the vibrator is inserted into the mud and vibrated for a period of time, it can be left in the air for solidification. When disassembling, remove the screws on the module. Pay attention not to knock the mold with hard objects to avoid affecting the quality of the prefabricated block.