進口氨氣鋼瓶減壓閥德國洛克《DE LOCKE》廠家強烈推薦 

一、進口氨氣鋼瓶減壓閥設計特點：

● 活塞式減壓結構 ● 母體螺紋：1/4" NPT（F） ● 內設過濾網 ● 可采用面板式或墻式安裝

■ 適用范圍

● 實驗室 ● 氣體分析測試 ● 流程控制 ● 氣體匯流排 ● 測試設備

■ 特性參數

● 最大輸入壓力： 3000，6000psig   ● 輸出壓力：0~250,0~500,0~1500,0~3000psig

● 安全測試壓力：1.5倍的最大進氣壓力 ● 適用溫度：-10℉~+165℉(-23℃~+74℃)

● 泄漏率：泡沫測試 ● CV值：0.06 ● 重量：0.9kg

材質：

1、母體：316L，Brass

2、上蓋：316L，Brass

3、膜片：316L

4、過濾網：316L（10μm）

5、閥座：PCTFE，PTFE，Vespel

6、彈簧：316L

7、閥芯頂桿：316L

Piston type pressure reducing structure ● mother thread: 1 / 4 "NPT (f) ● filter screen inside ● can be installed in panel or wall

■ scope of application

● laboratory ● gas analysis and test ● process control ● gas bus ● test equipment

Characteristic parameters

Maximum input pressure: 30006000 psi ● output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psi

Safety test pressure: 1.5 times of maximum inlet pressure ● applicable temperature: - 10 ℃～ 165 ℃ (- 23 ℃ ~ + 74 ℃)

Leakage rate: foam test > CV: 0.06: weight: 0.9kg

texture of material:

1. Maternal: 316L, brass

2. Upper cover: 316L, brass

3. Diaphragm: 316L

4. Filter screen: 316L (10 μ m)

5. Seat: PCTFE, PTFE, Vespel

6. Spring: 316L

7. Valve core ejector: 316L

二、進口氨氣鋼瓶減壓閥產品特征：

進口氨氣鋼瓶減壓閥，單級式膜片減壓結構，不銹鋼膜片壓力傳輸，輸出壓力穩定，適用于純凈氣體、標準氣體、腐蝕性氣體等。用用于石油化工、化纖、照明電器、熱處理、冶金、玻璃、食品、醫藥、電子、國防航天等主導領域。

德國洛克進口氨氣鋼瓶減壓閥接口可以適配國內所有規格的鋼瓶接口，特有的入口壓力補償技術抵消了因鋼瓶用氣后壓力下降導致的閥后壓力變動的問題。

Imported ammonia cylinder pressure reducing valve, single-stage diaphragm pressure reducing structure, stainless steel diaphragm pressure transmission, stable output pressure, suitable for pure gas, standard gas, corrosive gas, etc. It is used in petrochemical, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense and aerospace.

The port of pressure reducing valve for ammonia gas cylinder imported from Germany Locke can adapt to all kinds of domestic cylinder interfaces. The unique inlet pressure compensation technology can offset the problem of pressure change behind the valve caused by the pressure drop of cylinder after using gas.

三、進口氨氣鋼瓶減壓閥規格參數：

1、最大輸入壓力：3000，500 psig

2、輸出壓力：0～25，0～50，0～100， 0～250 psig

3、安全測試壓力：1.5倍的最大輸入壓力

4、適用溫度：-40°F 至＋165°F（-40℃至＋74℃）

1. Maximum input pressure: 3000500 PSI

2. Output pressure: 0-25, 0-50, 0-100, 0-250 psi

3. Safety test pressure: 1.5 times of the maximum input pressure

4. Applicable temperature: - 40 ° f to + 165 ° f (- 40 ℃ to + 74 ℃)

四、進口氨氣鋼瓶減壓閥產品簡介：

進口氨氣鋼瓶減壓閥是瓶裝氣體的減壓裝置，是用來顯示氣瓶內氣體及減壓后氣體的壓力，進口氨氣鋼瓶減壓閥就是將氨氣鋼瓶中的高壓氣體減為實驗所需的氣體壓力的減壓閥。采用活塞式減壓結構，輸出壓力穩定，主要用于高輸入壓力要求，最大壓力達6000 psig，適用于氨氣氣體。

The pressure reducing valve of imported ammonia cylinder is a pressure reducing device for bottled gas, which is used to display the pressure of the gas in the cylinder and after decompression. The pressure reducing valve of imported ammonia cylinder is the pressure reducing valve that reduces the high pressure gas in the ammonia cylinder to the gas pressure required by the experiment. It is mainly used for high input pressure requirements. The maximum pressure is up to 6000 psi. It is suitable for ammonia gas.