優質進口真空蝶閥品牌推薦德國洛克

一、進口真空蝶閥技術性能：

● 漏率：≤1.3×10-9Pa.M3/S;

● 適用壓力范圍：1.3×10-5Pa～3×105Pa;

● 工作溫度：氟橡膠-25℃～+150℃；

● 安裝位置：任意；

● 閥板兩側壓力差對閥門開、關無關；

● 壽命：≥10000次。

● leakage rate: ≤ 1.3 × 10-9pa.m3/s;

● applicable pressure range: 1.3 × 10-5pa ～ 3 × 105Pa;

● working temperature: Viton - 25 ℃ ~ + 150 ℃;

● installation position: any;

● the pressure difference on both sides of the valve plate has nothing to do with the opening and closing of the valve;

● service life: ≥ 10000 times.

二、進口真空蝶閥產品簡介：

德國《LOCKE》洛克進口真空蝶閥適用于電力等行業，介質為蒸汽或空氣的真空管路上，作通流或截止用，是密封型蝶閥，具有嚴密性好、啟閉操作靈活的特點，密封圈采用特種橡膠制成，耐溫高，耐老化性好，使用壽命長。

進口真空蝶閥采用T形斷面的密封圈，適應高速蒸汽介質的工況，調整密封圈的壓緊程度，可獲得最佳密封與操作效果。

Locke imported vacuum butterfly valve is suitable for electric power and other industries. The medium is steam or air on the vacuum pipeline. It is used for flow or cut-off. It is a sealed butterfly valve with good tightness and flexible opening and closing operation. The sealing ring is made of special rubber, with high temperature resistance, good aging resistance and long service life.

The imported vacuum butterfly valve adopts T-shaped section sealing ring, which adapts to the working condition of high-speed steam medium and adjusts the compression degree of sealing ring to obtain the best sealing and operation effect.

三、進口真空蝶閥技術參數：

1公稱通徑：DN15-600mm

2、公稱壓力：PN1.6-40Mpa

3、適用溫度：-25～150℃

4、閥體：WCB碳鋼，不銹鋼304，不銹鋼316

5、閥座：氟橡膠，丁腈膠

6、適用范圍：水，污水，油品，氣，蒸汽

7、連接方式：對夾，法蘭

8、制造標準：美標，國標，日標等

1. nominal diameter: dn15-600mm

2. Nominal pressure: pn1.6-40mpa

3. Applicable temperature: - 25 ～ 150 ℃

4. Valve body: WCB carbon steel, stainless steel 304, stainless steel 316

5. Seat: Viton, acrylic

6. Scope of application: water, sewage, oil, gas, steam

7. Connection mode: clamp, flange

Manufacturing standard: American Standard, national standard, Japanese standard, etc