宏旭定制   階梯式河道護坡護岸模具   階梯式河道護坡模具

專業生產流水槽鋼模具、水泥流水槽模具、急流槽鋼模具、卵型槽模具，U型槽模具，縫隙式排水槽模具，防浪塊模具，隔離帶模具，安全島模具，路沿石鋼模具，拱形骨架護坡鋼模板，扭王字塊模具，擋土墻模具，四腳空心方塊模具，防撞墻模具，箱體式護坡模具，生態擋墻砌塊模具，植草式護坡模具，L型擋土墻模具，框格護坡模具，排水溝鋼模具、泄水槽模具，農田灌溉U型槽模具，遮板模具，邊溝模具，水溝模具等。我廠所有鋼模具采用3-8mm鋼板焊接而成，每個型面都可打開，使用方便、出模快，成品效果好，我廠鋼模具在使用過程中，首先在模具里面刷上機油和脫模劑，有利于脫模具，然后將攪拌好的水泥或混凝土倒入模具中，經振動平臺振動成形，或振動棒振搗，等水泥初期凝固之后便可脫模，約24小時左右。Professional production of water channel steel mold, cement water channel mold, torrent channel steel mold, egg shaped groove mold, U-shaped groove mold, slit type drainage channel mold, wave block mold, isolation belt mold, safety island mold, road edge stone steel mold, arch skeleton slope protection steel template, Accropode block mold, retaining wall mold, four foot hollow block mold, anti-collision wall mold, box type slope protection mold , ecological retaining wall block mold, grass planting slope protection mold, L-shaped retaining wall mold, frame slope protection mold, drainage ditch steel mold, drain tank mold, farmland irrigation U-groove mold, shutter mold, side ditch mold, ditch mold, etc. All steel molds in our factory are welded with 3-8mm steel plates. Each profile can be opened, which is convenient to use, quick to take out the mold, and good finished product effect. In the process of using the steel mold of our factory, first brush the oil and release agent inside the mold, which is conducive to removing the mold, and then pour the mixed water mud or concrete into the mold, which is vibrated by the vibration platform, or vibrated by the vibrator, and so on It can be demoulded after initial solidification, about 24 hours.