進口電動高壓球閥德國洛克《DE LOCKE》廠家強烈推薦  

一、進口電動高壓球閥描述：

德國《LOCKE》洛克進口電動高壓球閥(High voltage electric ball valve)采用一體化機構與電動執行機構相配，是工業自動化控制的一種管道控制元件，以雙相電源380VC及單相電源AC220V和直流24VDC即可控制運轉，通常用于對管道介質進行遠程開關或調節控制。

進口電動高壓球閥主要用于管路中液壓油、氣體的流通與截止,采用鍛造閥體,嵌入式下游閥座,滲碳加硬處理的閥桿,根據材料變化的不同可達到單向或雙向密封的要求。

The high voltage electric ball valve imported from Locke, Germany, is a kind of pipe control element of industrial automation control, which is matched with the electric actuator by the integrated mechanism. It is controlled by two-phase power supply 380vc, single-phase power supply AC220V and DC 24VDC. It is usually used for remote switching or regulating control of pipe medium.

The imported electric high-pressure ball valve is mainly used for the flow and cut-off of hydraulic oil and gas in the pipeline. It adopts forged valve body, embedded downstream valve seat, carburized and hardened valve rod, which can meet the requirements of one-way or two-way sealing according to the change of materials.
二、進口電動高壓球閥結構優點：

20萬次正常動作無需任何維護；

交流和直流電機均有過熱保護；

有普通型和高速型，最快速度可達1-2秒；

可選電壓：AC220V，AC110V，DC24V，DC14V；

體積小，重量輕，接線簡單。

分開關型和比例調節型

閥門耐壓達70MPA.

200000 normal actions without any maintenance;

Both AC and DC motors have overheat protection;

There are common type and high-speed type, the fastest speed can reach 1-2 seconds;

Optional voltage: AC220V, AC110V, DC24V, dc14v;

Small size, light weight, simple wiring.

Separate closing type and proportional regulating type

The pressure resistance of the valve is up to 70MPa

三、進口電動高壓球閥參數：

1、公稱通徑：3-80mm

2、公稱壓力：10.0~70.0MPa

3、適用溫度：-29℃~+180℃

4、連接方式：螺紋、卡箍、對焊、承插焊

5、閥結構：一體式、兩塊式

6、閥體材質：316L、316、304、碳鋼

7、閥球材質：316L、316、304

8、密封材質：PTFE、合金、POM

9、適用介質：高壓氣體、液體

10、可選附件：限位開關、定位器、電磁閥、減壓閥

1. Nominal diameter: 3-80mm

2. Nominal pressure: 10.0 ~ 70.0mpa

3. Applicable temperature: - 29 ℃ ~ + 180 ℃

4. Connection mode: thread, clamp, butt welding, socket welding

5. Valve structure: one piece, two piece

6. Valve body material: 316L, 316, 304, carbon steel

7. Ball material: 316L, 316, 304

8. Sealing material: PTFE, alloy, POM

9. Applicable medium: high pressure gas and liquid

10. Optional accessories: limit switch, positioner, solenoid valve, pressure reducing valve