高品質進口雙向壓蝶閥優選德國洛克

一、進口雙向壓蝶閥產品簡介：

德國《LOCKE》洛克進口雙向壓蝶閥(Dual pressure valve)構造合理，密封緊密牢靠、流阻小、壓差低、驅動靈敏省力，運用壽命倍增。雙公平，即軸向公平，閥軸中心線不在閥板密封面上；徑向公平：閥軸中心線不在閥門通道的中心線上，閥板采用雙平板桁架式多流道構造，在流速較高時，各流道水流可以相互制衡，防止閥板呈現哆嗦景象，確保閥門的穩定性。特殊的設計，特殊的幾何構造，使閥板具有越關越緊的功用，當翻開閥門時，只需閥軸略微旋轉，閥板即全部脫離閥座，增加了摩擦力，使開啟力矩出現最小最佳形態，密封嚴實牢靠，經久耐用。

The dual pressure valve imported from Locke, Germany, has reasonable structure, tight and reliable seal, small flow resistance, low pressure difference, sensitive and labor-saving driving, and double service life. Double fairness, i.e. axial fairness, the center line of the valve shaft is not on the sealing surface of the valve plate; radial fairness: the center line of the valve shaft is not on the center line of the valve channel, and the valve plate adopts the double plate truss type multi channel structure. When the flow velocity is high, the flow in each channel can check and balance each other, so as to prevent the valve plate from shivering and ensure the stability of the valve. The special design and special geometry structure make the valve plate have the function of closing and tightening. When the valve is opened, only the valve shaft rotates slightly, and the valve plate is completely separated from the valve seat, increasing the friction force, making the opening torque appear the minimum optimal form, and the sealing is tight and reliable, durable.

二、進口雙向壓蝶閥主要零部件材質：

閥體、填料、壓蓋：WCB

蝶板：不銹鋼304

閥桿：不銹鋼304

蝶板密封圈：不銹鋼、石墨夾層的復合結構

閥體密封面：合金鋼

填料：柔性石墨

手輪：球墨鑄鐵

Valve body, packing and gland: WCB

Butterfly plate: stainless steel 304

Stem: stainless steel 304

Butterfly plate seal ring: composite structure of stainless steel and graphite interlayer

Valve body sealing surface: alloy steel

Packing: flexible graphite

Hand wheel: nodular cast iron

三、進口雙向壓蝶閥產品特點:

1、特殊的結構形式可任意調整密封比壓，使密封面不易損壞，提高閥門的使用壽命。

2、蝶閥操作扭矩較小，轉90度啟閉，輕便迅速。

3、流阻小，具有良好的水力特性，流量特性近似傾斜直線，節能效果好，雙向密封對水流無方向要求。

4、蝶閥密封性能可靠，啟閉次數達20000次以上，使用壽命20年以上。

5、閥板采用符合流體力學性能的平衡形結構流道設計，在閥門全開時阻力系數≤0.15。

1.The special structure can adjust the sealing pressure at will, which makes the sealing surface not easy to be damaged and improves the service life of the valve.

2.The operation torque of butterfly valve is small, turning 90 degrees for opening and closing, light and fast.

3.It has small flow resistance, good hydraulic characteristics, flow characteristics similar to inclined straight line, good energy-saving effect, two-way sealing has no direction requirements for water flow.

4.The sealing performance of butterfly valve is reliable, the opening and closing times are more than 20000, and the service life is more than 20 years.

5.The valve plate adopts the balanced structure flow channel design which conforms to the hydrodynamic performance, and the resistance coefficient is ≤ 0.15 when the valve is fully open.

四、進口雙向壓蝶閥技術規范描述 :

1、蝶閥為雙向承壓，雙向不銹鋼金屬硬密封，結構簡單緊湊、重量輕、操作方便，性能可靠，功能齊全，造型美觀大方，便于維修。

2、蝶板密封圈在蝶閥安裝后，在閥體內均可容易更換和調整。

3、蝶閥蝶板采用的是平衡形結構，此結構剛度好，過流面積大，流阻小，這樣在閥門全開時，不易產生抖動現象，全關時，能有效的阻止密封圈的過度變形，防止損壞整個密封圈導致閥門泄漏。

4、閥體密封面采用不銹鋼密封，不銹鋼閥座材料具有良好的抗擦傷性，抗氣蝕性和硬度穩定性，試驗證明在壓力狀態下，閥門連續開啟25000次，未見有擦傷現象)大大提高了閥門的使用壽命。

5、在軸承與體腔內接觸部位加有2道編織型密封圈，可防止泥沙等顆粒狀介質進入軸承中，造成卡死現象。

6、雙偏心雙向雙向壓蝶閥可采用液控、氣動、電動、渦輪等不同的驅動方式。

1. The butterfly valve is bidirectional pressure bearing and bidirectional stainless steel metal hard sealing, with simple and compact structure, light weight, convenient operation, reliable performance, complete functions, beautiful appearance and easy maintenance.

2. After the butterfly valve is installed, the sealing ring of butterfly plate can be easily replaced and adjusted in the valve body.

3. Butterfly valve butterfly plate adopts the balanced structure, which has good rigidity, large flow area and small flow resistance, so that when the valve is fully open, it is not easy to produce jitter. When it is fully closed, it can effectively prevent the excessive deformation of the sealing ring, and prevent the damage of the entire sealing ring from leading to the leakage of the valve.

4. The sealing surface of the valve body is sealed with stainless steel, and the stainless steel valve seat material has good scratch resistance, cavitation resistance and hardness stability. The test shows that under the pressure condition, the valve can be opened 25000 times continuously without scratch), which greatly improves the service life of the valve.

5. Two braided sealing rings are added at the contact part between the bearing and the body cavity, which can prevent the sand and other granular media from entering the bearing and causing jamming.

6. The double eccentric two-way and two-way pressure butterfly valve can be driven by hydraulic control, pneumatic, electric, turbine and other different ways.

五、進口雙向壓蝶閥技術參數：

公稱通徑:  DN50-2000mm

公稱壓力：PN0.6-4.0MPa

適用介質：蒸汽，油品，熱空氣，腐蝕性濁水，煤氣，含有微小顆粒，易結晶，腐蝕性等介質

滲漏率：＜0.1×DNmmз/s

適用溫度：軟密封：-40℃-350℃  硬密封：-50℃-600℃

傳動方式：蝸輪傳動，電動傳動，氣動傳動，液動傳動

Nominal diameter: dn50-2000mm

Nominal pressure: pn0.6-4.0mpa

Applicable media: steam, oil, hot air, corrosive turbid water, gas, containing micro particles, easy to crystallize, corrosive and other media

Leakage rate: ＜ 0.1 × dnmm з / S

Applicable temperature: soft seal: - 40 ℃ - 350 ℃ hard seal: - 50 ℃ - 600 ℃

Transmission mode: worm drive, electric drive, pneumatic drive, hydraulic drive