宏旭定制   圓形井體模具  井體鋼模具

井體鋼模具  圓形井體鋼模具專業(yè)生產預制井體模具，井體模具，井體鋼模具，預制井體鋼模具，混凝土井體模具，混凝土井體鋼模具，路基邊溝蓋板塑料模具，花磚塑料模具等各種塑料模具和鋼模具。

井體鋼模具  圓形井體鋼模具平常要怎么清洗呢?先是模具表面灰塵的清掃:用干凈的抹布抹完之后，用手摸模具表面，如果感覺不到有灰塵的話，那么就是合格。沖孔部位的清掃:用錘子把孔內的廢料還有滑料板上粘著的廢料和刃口部位切廢料的殘屑全部清除掉。有鍍層的模具，必須對模具的拉伸表面進行清掃，必須用手來確認表面是否光潔，生產時的材料必須用抹布抹干凈，生產后，必須給模具涂上少許的油。還有就是裝模前要對模具的上下表面進行清擦，保證模具安裝面和壓機工作臺面不受壓傷及模具在生產中上下安裝面的平行度。模具裝好后將模具打開，將模具各部分清擦干凈，特別是導向機構，對于表面件模具，其型面清擦干凈，以保證制件的質量，這就是有關模具的平時的清洗地介紹。

Well body steel mold round well body steel mold professional production Prefabricated well body mold, well body steel mold, prefabricated well body steel mold, concrete well body mold, concrete well body steel mold, roadbed side ditch cover plate plastic mold, brick plastic mold and other plastic mold and steel mold.

How to clean the round well steel mold? First, clean the dust on the surface of the mold: after wiping with a clean cloth, touch the surface of the mold by hand. If there is no dust, then it is qualified. Cleaning of punching part: use hammer to remove all the scraps in the hole, the scraps stuck on the slide plate and the scraps from the cutting edge. For the coated mold, the drawing surface of the die must be cleaned, and the surface must be confirmed by hand. The materials used in production must be wiped clean with cloth. After production, the mold must be coated with a little oil. In addition, the upper and lower surfaces of the mold should be cleaned before the mold is installed, so as to ensure that the mold mounting surface and the working table of the press will not be damaged by pressure and the parallelism of the upper and lower mounting surfaces of the mold in production. After the mold is installed, open the mold and clean all parts of the mold, especially the guiding mechanism. For the surface part mold, the surface is cleaned to ensure the quality of the product. This is the introduction of the usual cleaning place of the mold.