進口襯氟蝶閥用心制造成就品質德國洛克造

一、進口襯氟蝶閥產品簡介：

德國《LOCKE》洛克進口襯氟蝶閥閥座與閥體內襯一體化，閥門工作時只有全塑閥座與襯塑蝶板與介質接觸閥門可承受襯里材料介紹的介質腐蝕。采用四極密封結構并在密封面處配以耐溫抗老化的SI橡膠的彈性襯墊，完全達到介質的零泄漏具有嚴密的密封性能超長的使用壽命；

The valve seat and valve body liner of lock imported fluorine lined butterfly valve are integrated. When the valve works, only the full plastic valve seat and the plastic lined butterfly plate contact with the medium, and the valve can withstand the medium corrosion introduced by the lining material. The quadrupole seal structure and the elastic lining of the SI rubber with temperature resistance and aging resistance are applied to the sealing surface to achieve zero leakage of the medium.

二、進口襯氟蝶閥結構特點：

1、中線蝶閥為整個蝶板與閥座在360°圓周內同心（中線），具有雙向密封功能壓力、流量可自由調節；    

2、偏心蝶閥為二維方向偏心產品的凸輪效應會使密封副產生足夠的密封比壓。并且隨著工作壓力的升高密封效果更理想；。

3、四級加載彈性密封保證了閥門內、外的零泄漏。

1. The center line butterfly valve is concentric (center line) within 360 ° circle of the whole butterfly plate and valve seat, with bidirectional sealing function, and the pressure and flow can be adjusted freely;

2. The cam effect of eccentric butterfly valve with two-dimensional direction and eccentric product will produce enough sealing pressure. And with the increase of working pressure, the sealing effect is better;.

3. Four stage loading elastic seal ensures zero leakage inside and outside the valve.

三、進口襯氟蝶閥安裝于維護：

1、在安裝時，閥瓣要停在關閉的位置上。

2、開啟位置應按蝶板的旋轉角度來確定。

3、帶有旁通閥的蝶閥，開啟前應先打開旁通閥。

4、應按制造廠的安裝說明書進行安裝，重量大的蝶閥，應設置牢固的基礎。

5、蝶閥的蝶板安裝于管道的直徑方向。在蝶閥閥體圓柱形通道內，圓盤形蝶板繞著軸線旋轉，旋轉角度為 0°~90° 之間，旋轉到 90° 時，閥門則牌全開狀態。

6、如果要求蝶閥作為流量控制使用，主要的是正確選擇閥門的尺寸和類型。蝶閥的結構原理尤其適合制作大口徑閥門。蝶閥不僅在石油、煤氣、化工、水處理等一般工業上得到廣泛應用，而且還應用于熱電站的冷卻水系統。

7、常用的蝶閥有對夾式蝶閥和法蘭式蝶閥兩種。對夾式蝶閥是用雙頭螺栓將閥門連接在兩管道法蘭之間，法蘭式蝶閥是閥門上帶有法蘭，用螺栓將閥門上兩端法蘭連接在管道法蘭上。

8、蝶閥的蝶板安裝于管道的直徑方向。在蝶閥閥體圓柱形通道內，圓盤形蝶板繞著軸線旋轉，旋轉角度為 0°~90° 之間，旋轉到 90° 時，閥門則牌全開狀態。

1. During installation, the disc shall be stopped at the closed position.

2. The opening position shall be determined according to the rotation angle of butterfly plate.

3. For butterfly valve with bypass valve, the bypass valve shall be opened before opening.

4. The installation shall be carried out according to the installation instructions of the manufacturer. The heavy butterfly valve shall be provided with a firm foundation.

5. The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis, with the rotation angle between 0 ° and 90 °. When it rotates to 90 °, the valve will be fully open.

6. If butterfly valve is required to be used as flow control, the main thing is to correctly select the size and type of valve. The structure and principle of butterfly valve is especially suitable for making large diameter valve. Butterfly valve is not only widely used in petroleum, gas, chemical industry, water treatment and other general industries, but also in the cooling water system of thermal power station.

7. There are two kinds of butterfly valves commonly used: wafer butterfly valve and flange butterfly valve. The double clip butterfly valve is connected between two pipe flanges with stud bolts. The flange butterfly valve has flange on the valve, and the flange on both ends of the valve is connected to the pipe flange with bolts.

8. The butterfly plate of the butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical channel of the butterfly valve body, the disc-shaped butterfly plate rotates around the axis, with the rotation angle between 0 ° and 90 °. When it rotates to 90 °, the valve will be fully open.

四、進口襯氟蝶閥性能參數：

規格范圍：DN50-DN2500

溫度范圍：-10℃≈220℃

壓力范圍：PN16

閥體材質：鑄鐵/鑄鋼

閥桿材質：碳素鋼

閥座材質：PTFE

閥板材質：鑄鐵/鑄鋼

襯四氟連接方式：對夾式，法蘭式

適用范圍：水、油品、污水、氣動、強酸強堿及工業液體

Specification range: dn50-dn2500

Temperature range: - 10 ℃ ~ 220 ℃

Pressure range: PN16

Valve body material: cast iron / cast steel

Stem material: carbon steel

Valve seat material: PTFE

Valve plate material: cast iron / cast steel

Teflon lining connection: wafer type, flange type

Scope of application: water, oil, sewage, pneumatic, strong acid, strong alkali and industrial liquid