宏旭定制   滲水井鋼模具   滲水井模具 

 雨水井篦子模具  水泥井篦子模具使用方式與說明簡單的說可以是蓋板或者井蓋，而雨水篦子模具也成為雨篦子或者水篦子模具，其組合形式就是蓋板加上底座成為完整的一套，常見的規格為40*60 45*75 50*50等形狀。雨水井篦子模具在不同的道路上使用的規格受到限制，常用的規格就是上述幾種，這種預制塊的厚度基本上都是7公分的。雨篦子預制塊的制作同其他小型預制塊的制作方法相同，就是在拆模的時候因為孔比較多稍微費事一些，所以這種模板的內部刷油必須到位，而且必須等到完全凝固方可進行脫模，有條件的可以焊接一個脫模架。

The use mode and description of cement well grate mold of rainwater well can be simply said to be cover plate or well cover, and rainwater grate mold also becomes rain grate or water grate mold. Its combination form is cover plate and base to form a complete set. The common specification is 40 * 60 45 * 75 50 * 50 and other shapes. The specifications of the rainwater well grate mold used on different roads are limited. The commonly used specifications are the above-mentioned ones. The thickness of the prefabricated block is basically 7 cm. The manufacturing method of rain grate precast block is the same as that of other small prefabricated blocks, that is, when removing the formwork, the internal painting of the formwork must be in place, and the formwork can be demoulded only after it is completely solidified. If conditions permit, a demoulding frame can be welded.