水泥水槽模具   混凝土水槽模具的表面處理技術有很多,但最早的還是這種模具的表面處理技術,是通過表面涂覆、表面改性或復合處理技術,改變模具表面的形態、化學成分、組織結構和應力狀態,以獲得所需表面性能的系統工程。目前在水泥水槽模具   混凝土水槽模具制造中應用較多的主要是滲氮、滲碳和硬化膜沉積。由于滲氮技術可形成優良性能的表面,并且滲氮工藝與模具鋼的淬火工藝有良好的協調性,同時滲氮溫度低,滲氮后不需激烈冷卻,模具的變形極小,因此模具的表面強化是采用滲氮技術較早,也是應用最廣泛的。There are many surface treatment technologies for cement water tank mold and concrete water tank mold, but the earliest one is the surface treatment technology of this mold. It is a systematic engineering to change the shape, chemical composition, organizational structure and stress state of the mold surface through surface coating, surface modification or composite treatment technology, so as to obtain the required surface properties. At present, nitriding, carburizing and hardening film deposition are widely used in the manufacture of cement water tank mould and concrete water tank mould. Because the nitriding technology can form a surface with excellent performance, and the nitriding process has good coordination with the quenching process of die steel, at the same time, the nitriding temperature is low, there is no need for fierce cooling after nitriding, and the deformation of the die is very small, so the surface strengthening of the die is the earliest and most widely used nitriding technology.