進口黃銅減壓閥德國洛克品牌產品介紹 

二、進口黃銅減壓閥技術參數：

1、公稱通徑：DN15-50mm

2、公稱壓力：1.0-1.6MPa

3、工作介質：冷熱水

4、工作溫度：0℃≤t≤70℃

5、出口壓力:0.1MPa～0.55MPa

1. Nominal diameter: dn15-50mm

2. Nominal pressure: 1.0-1.6mpa

3. Working medium: hot and cold water

4. Working temperature: 0 ℃ ≤ t ≤ 70 ℃

5. Outlet pressure: 0.1MPa ～ 0.55mpa

三、進口黃銅減壓閥結構特點：

采用直接作用隔膜式結構，內部結構非常簡單，無卡阻，性能可靠，經久耐用。

耐臟防水垢,不需過濾器,不需旁通管,配管極其簡單,能節省大量空間和配管成本。

出口壓力精密可調，在一般場合下，可以認為出口壓力不受進口壓力的影響（出口壓力的變化量是△P1的8%）。

極佳的水力特性，壓力損失小，減壓比可達成10：1以上。

可滿足多種減壓要求，特別適用于支管減壓系統。

With direct acting diaphragm structure, the internal structure is very simple, no jamming, reliable performance, durable.

The utility model has the advantages of dirt resistance, water-proof scale resistance, no filter, no bypass pipe, extremely simple piping, and large amount of space and piping cost can be saved.

The outlet pressure is precisely adjustable. In general, it can be considered that the outlet pressure is not affected by the inlet pressure (the change of the outlet pressure is 8% of △ P1).

Excellent hydraulic characteristics, small pressure loss, pressure reduction ratio can reach more than 10:1.

It can meet a variety of pressure reducing requirements, especially suitable for branch pressure reducing system.

四、進口黃銅減壓閥工作原理：

出口壓力作用在隔膜底面和閥瓣底面，當它超過彈簧設定值時，壓縮彈簧，使閥瓣關閉。只要下游無水流動，出口壓力將基本保持在設定值（其變化量僅為入口壓力變化量的8%）；當下游用水時，出口壓力下降，彈簧推開隔膜，打開減壓閥。水流連續流通一陣后，減壓閥的開啟產生自阻尼效應，使啟閉動作趨于平穩。

The outlet pressure acts on the bottom of the diaphragm and the bottom of the disc. When it exceeds the set value of the spring, the spring is compressed to close the disc. As long as there is no water flow downstream, the outlet pressure will basically remain at the set value (the change is only 8% of the change of the inlet pressure); when water is used downstream, the outlet pressure drops, the spring pushes the diaphragm open, and opens the pressure reducing valve. After continuous flow of water for a while, the opening of pressure reducing valve produces self damping effect, which makes the opening and closing action tend to be stable.

一、進口黃銅減壓閥產品描述:

德國LOCKE洛克進口黃銅減壓閥是通體內的啟閉件的開度來調節介質的流量，將介質的壓力降低，同時借助閥后壓力的作用調節啟閉件的開度，使閥后壓力保持在使用工況所需的壓力范圍。從流體力學的觀點看，減壓閥是一個局部阻力可以變化的節流元件，即通過改變節流面積，使流速及流體的動能改變，造成不同的壓力損失，從而達到減壓的目的。然后依靠控制與調節系統的調節，使閥后壓力的波動與彈簧力相平衡，使閥后壓力在一定的誤差范圍內保持恒定。

The brass pressure reducing valve imported from Locke lock in Germany regulates the flow of medium by the opening of the opening parts in the whole body to reduce the pressure of medium. At the same time, the opening of the opening parts is adjusted by the function of the pressure behind the valve to keep the pressure behind the valve within the pressure range required by the working condition. From the point of view of hydrodynamics, the pressure reducing valve is a throttling element whose local resistance can be changed. That is to say, by changing the throttling area, the velocity and kinetic energy of the fluid can be changed, resulting in different pressure losses, so as to achieve the purpose of pressure reduction. Then, by the adjustment of the control and regulation system, the fluctuation of the pressure behind the valve is balanced with the spring force, and the pressure behind the valve is kept constant within a certain error range.