進口高純氣體減壓閥使用效果比較以及使用壽命德國洛克 

一、進口高純氣體減壓閥結構參數：

1、最大輸入壓力： 3000，6000psi

2、 輸出壓力：0~250,0~500,0~1500,0~3000psi

3、 安全測試壓力：1.5倍的最大進氣壓力

4、適用溫度：-10℉~+165℉(-23℃~+74℃)

5、泄漏率：泡沫測試

6、 CV值：0.06

7、 重量：0.9kg

1. Maximum input pressure: 30006000 PSI

2. Output pressure: 0 ~ 250,0 ~ 500,0 ~ 1500,0 ~ 3000psi

3. Safety test pressure: 1.5 times of the maximum intake pressure

4. Applicable temperature: - 10 ° f to + 165 ° f (- 23 ° C to + 74 ° C)

5. Leakage rate: foam test

6. CV value: 0.06

7. Weight: 0.9kg

二、進口高純氣體減壓閥設計特點：

1、活塞式減壓結構

2、母體螺紋：1/4" NPT(F)

3、內設過濾網

4、可采用面板式或墻式安裝

1. Piston type pressure reducing structure

2. Female thread: 1 / 4 "NPT (f)

3. Built in filter screen

4. Panel or wall mounting

三、進口高純氣體減壓閥產品特征：

進口高純氣體減壓閥，單級式膜片減壓結構，不銹鋼膜片壓力傳輸，輸出壓力穩定，適用于純凈氣體、標準氣體、腐蝕性氣體等。用用于石油化工、化纖、照明電器、熱處理、冶金、玻璃、食品、醫藥、電子、國防航天、主導領域。

德國《LOCKE》洛克進口高純氣體減壓閥接口可以適配國內所有規格的鋼瓶接口，特有的入口壓力補償技術抵消了因鋼瓶用氣后壓力下降導致的閥后壓力變動的問題。

Imported high purity gas pressure reducing valve, single-stage diaphragm pressure reducing structure, stainless steel diaphragm pressure transmission, stable output pressure, suitable for pure gas, standard gas, corrosive gas, etc. It is used in petrochemical industry, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense, aerospace and leading fields.

The high purity gas pressure reducing valve imported by Locke in Germany can adapt to all specifications of cylinder interfaces in China. The unique inlet pressure compensation technology offsets the problem of pressure change behind the valve caused by pressure drop after cylinder gas consumption.

四、進口高純氣體減壓閥描述：

德國LOCKE洛克進口高純氣體減壓閥，就是將高純氣體鋼瓶中的高壓氣體減為實驗及工況所需的低壓氣體壓力的減壓閥。采用活塞式減壓結構，輸出壓力穩定，主要用于石油化工、化纖、照明電器、熱處理、冶金、玻璃、食品、醫藥、電子、國防航天、航空等主導領域的高純氣體鋼瓶的出口減壓。

高純氣體一般都是貯存在專用的高壓氣體鋼瓶中，使用時通過減壓閥使氣體壓力降至實驗所需范圍，再經過其它控制閥門細調，使氣體輸入使用系統。由于高純氣體氣瓶內壓力較高，而氣焊和氣割和使用點所需的壓力卻較小，所以需要用減壓器來把高純氣體儲存在氣瓶內的較高壓力的氣體降為低壓氣體，并應保證高純氣體所需的工作壓力自始至終保持穩定狀態。進口高純氣體減壓器是將高壓高純氣體降為低壓氣體、并保持輸出高純氣體的壓力和流量穩定不變的調節裝置。

The high-purity gas pressure reducing valve imported from locklock, Germany, is a pressure reducing valve that reduces the high-pressure gas in the high-purity gas cylinder to the low-pressure gas pressure required by the experiment and working conditions. It is mainly used for the export decompression of high-purity gas cylinders in the leading fields of petrochemical industry, chemical fiber, lighting appliances, heat treatment, metallurgy, glass, food, medicine, electronics, national defense, aerospace, aviation, etc.

High purity gas is usually stored in a special high-pressure gas cylinder. During use, the gas pressure is reduced to the required range of the experiment through the pressure reducing valve, and then the gas is input into the use system through other control valves. Because the pressure in the high-purity gas cylinder is high, but the pressure required for gas welding, gas cutting and use point is small, it is necessary to use a pressure reducer to reduce the high-pressure gas stored in the cylinder to low-pressure gas, and ensure that the working pressure required for the high-purity gas is stable from the beginning to the end. The imported high-purity gas decompressor is a regulating device which can reduce the high-pressure and high-purity gas to low-pressure gas and keep the pressure and flow of the output high-purity gas stable.