進口鑄鋼籃式過濾器質量就是好德國洛克《DE LOCKE》

一、進口鑄鋼籃式過濾器技術參數：

1、規格范圍：DN15-DN500

2、溫度范圍：－60℃≈600℃

3、壓力范圍：PN1.6≈32MPA

4、閥體材質： 鑄鋼、不銹鋼、合金鋼 

5、濾網材質：不銹鋼

6、連接方式：法蘭、內螺紋、焊接

7、適用范圍：飽和蒸汽,水、氣體、燃汽、油品、氨、烴類、甲烷、液氮、液氧、尿素、氧化性及腐蝕性液體介質。

1. Specification range: dn15-dn500

2. Temperature range: - 60 ℃ ~ 600 ℃

3. Pressure range: pn1.6 ≈ 32Mpa

4. Valve body material: cast steel, stainless steel, alloy steel

5. Filter screen material: stainless steel

6. Connection method: flange, internal thread, welding

7. Application: saturated steam, water, gas, gas, oil, ammonia, hydrocarbon, methane, liquid nitrogen, liquid oxygen, urea, oxidizing and corrosive liquid medium.

二、進口鑄鋼籃式過濾器優點：

1.進口籃式過濾器適用于蒸汽、空氣、煤油、水等配管中排出銹渣和異物，用于保護閥門和設備.

2.過濾網采用不銹鋼雙層網結構，堅固耐用

3.可選項壓力表連接，蓋上凸合面鉆有螺紋孔以便安裝壓力表

4.過濾面積大、故壓力損失小

5.拆洗方便

1. The imported basket filter is suitable for discharging rust slag and foreign matters from steam, air, kerosene, water and other piping to protect valves and equipment

2. The filter screen is made of stainless steel double-layer structure, which is solid and durable

3. Optional pressure gauge connection, threaded hole is drilled on the convex joint surface of the cover to facilitate the installation of the pressure gauge

4. Large filtration area, small pressure loss

5. Easy to disassemble and wash

三、進口鑄鋼籃式過濾器概述：

德國LOCKE洛克進口籃式過濾器(basket type filter)主要由接管、主管、濾籃、法蘭蓋及緊固件等組成，當流體通過主管進入過濾籃后，固體雜質顆粒被阻擋在過濾籃內，而潔凈的流體通過濾籃后由過濾器出口排出。當需要清洗時，旋開主管底部螺塞，排凈流體，拆卸法蘭蓋，取出濾籃，清洗后重新裝入即可，因此，使用維護極為方便。

The basket type filter imported from locklock, Germany, is mainly composed of connecting pipe, main pipe, filter basket, flange cover and fastener. When the fluid enters the filter basket through the main pipe, the solid impurity particles are blocked in the filter basket, and the clean fluid is discharged from the filter outlet after passing through the filter basket. When cleaning is needed, unscrew the screw plug at the bottom of the main pipe, drain the fluid, remove the flange cover, take out the filter basket, and then install it again after cleaning. Therefore, it is very convenient for use and maintenance.