Adash A4404 SAB Technical Specifications

Input channels

4 AC, ICP? power supply on/off 4 DC for process values 1 TACHO for external trigger

Input range

AC +/- 12 V peak-peak DC +/- 24V

AD conversion

24 bit, 64 bit internal signal processing No AutoGain function!

Dynamic range S/N

120 dB

Frequency ranges

Maximum range: 1 Hz - 90 kHz (1 Ch, 194 kHz sampling) Maximum range: 1 Hz - 25 kHz (4 Ch, 64 kHz sampling) Minimum range: 1 Hz - 25 Hz (4 Ch, 64 Hz sampling)

Sampling mode

Fully simultaneous for 4 channels

FFT resolution

Min. 100 lines Max. 3 276 800 lines

Unit modes

Analyzer - analytic measurement Data collector - route measurement Balancer - on-site balancing Recorder - signal recording Stethoscope FASIT - Expert system for fault detection Octave analyzer Bump test ADS - Animated Deflection Shapes

Processor

According to the PC

Memory, Route

According to the PC hard drive

Data processing

Real time FFT DEMOD - ENVELOPE analysis ACMT - low speed bearing analysis Order analysis User band pass analysis RPM measurement DC measurement Orbit measurement

Signal Recorder

64 kHz sampling frequency 4 Ch memory consumption 3 GB/hour 4 Ch total recording - 35 hours

Trigger

Manual, External, Signal level, Time Use for signal recording trigger Speed change, Time interval

Communication

USB

Temperature range

-10?C to +50?C

Power

USB powered

Case

Aluminium heavy duty

Size and Weight

110 x 115 x 35 mm, 350 g